Cheers for the info. All seems straight forward

Hi all whats involved with changing the front wheel bearings on an Sammi?

It is just a thought, but I have had strange electrical experiances with my SJ. Try replacing the Fuseable link with a new piece of wire or as I did a jumbo 45Amp fuse. It all started when I Changed the battery and must of disturbed the link I found although I was getting 12v where I was supposed to...

Yep mine came off in sheets along with most of the floor pan. I found that i did get a bit of floor drumming when I had replaced it with new metal. Mine you over the noise the rest of the Zuk makes it was hardly noticable. But the better half complained so I stuck wide bitumin flashing tape to the f...

i had a rummage on ebay and seen a few but the threaded bit is 1/8" what is that in mm that my calipers read in By the way I have read your quote when it says 1/8" thread I suspect the size will not be 3.175mm or 0.125" If we are talking water senders or oil senders they usualy are f...

Ah Spotlights now it all becomes clearer. Depending on what wattage your spotlights are you can probably get away with running a supply from battery throught a fuse to a switch then two the lights 55w Spots will only Produce 8 ish amps so the switch you use should be 10 amps and will be ok. If how e...

i got some oven cable for the wiring: That should be right for the size of cable 6mm sq (for info the cable size is calculated from the cross sectional area of each single copper core x the ammount of cores). when you say your head lights are wired direct to the battery do you still have side/headl...

Hi

I had exectly the same prob 4 years ago when one of mine snapped. Only place I found i could get them was main dealer but that after several attempts with different pics i got a pair. I have an old one i think its drivers side if that helps

I'd think you would either just earth it to some bodywork... or straight to the battery Never earth an ameter!!!!!!!!!!!!!!!!!!!!!!!!!! A ammeter is designed to go in serise to measure the amps in a circuit Looking at the amp guage you have there it seems that it is going to show whether the batter...

I guess it's to make sure you don't accidentally drain the gearbox oil onto your face while trying to top it up ;) Its quite a tight squeeze between the trany box and the gearbox. First time i did it i used those stupid little bottles of gear oil from halfords they where a bugger to put the oil in ...