Grand vitara central locking advice.

[ipbr21054]

My system is still working great some 6 months down the rd.
Good that you have updated also,cheers.

[souleh]

I have got myself a Hawk kit, has anyone got a photograph of which plug the wire is in?

[ipbr21054]

Just follow the 2 wires from the locking switch on the door down to the right hand side of the pedals.
If i remember it was a tight spot for the plug so attached to the wires some inches before it.

Use a multimeter on the door switch or follow wiring colourts shown above.

[souleh]

I had the same "that surely wont fit" moment when I pulled the connector.
I'll try to find the wires further up.

[souleh]

Just follow the 2 wires from the locking switch on the door down to the right hand side of the pedals.
If i remember it was a tight spot for the plug so attached to the wires some inches before it.

Use a multimeter on the door switch or follow wiring colourts shown above.

Seems the wiring diagram I have is way off, the one I have has pink & pink / green, turns out those are pink / black & pink /green.
Interesting thing is though, if I get the multimeter on those wires to a live it just completes the circuit and no difference is made with the switch.

[Jay18]

I done mine a few months ago but the kit I have is rubbish, cheap £20 kit and the receiver isn't long enough so sometime I'm standing there pressing the button about 6 times haha, think I'll get one of the hawk kits

If your having trouble I'll go out and take some pics, I wired into the door switch under the dash and I also wired in the hazards to flash

[souleh]

If you could take me a few piccies that would be grand, I'm thinking yours may be the older wiring though.

Thanks,
Soul.

[Darrell]

Just follow the 2 wires from the locking switch on the door down to the right hand side of the pedals.
If i remember it was a tight spot for the plug so attached to the wires some inches before it.

Use a multimeter on the door switch or follow wiring colourts shown above.

Seems the wiring diagram I have is way off, the one I have has pink & pink / green, turns out those are pink / black & pink /green.
Interesting thing is though, if I get the multimeter on those wires to a live it just completes the circuit and no difference is made with the switch.

The kit needs to earth either of those wires.
Yours being a 54 plate may have this wiring..
This is only applicable to the hardtop version with the updated dashboard 2003-2005

[souleh]

Just follow the 2 wires from the locking switch on the door down to the right hand side of the pedals.
If i remember it was a tight spot for the plug so attached to the wires some inches before it.

Use a multimeter on the door switch or follow wiring colourts shown above.

Seems the wiring diagram I have is way off, the one I have has pink & pink / green, turns out those are pink / black & pink /green.
Interesting thing is though, if I get the multimeter on those wires to a live it just completes the circuit and no difference is made with the switch.

The kit needs to earth either of those wires.
Yours being a 54 plate may have this wiring..
This is only applicable to the hardtop version with the updated dashboard 2003-2005

Thanks, you literally solved all my problems .
I will give this another crack tomorrow, am I right in guessing that the Blue / Red from the ignition is a permanent live feed, and the Yellow / Red will give me the hazards?

[souleh]

Right, the central locking is spot on and working now. Just cant find the wires for the indicators, would you have the wiring diagram for those?

Thanks,
Soul