Dan's Suzuki Samurai build

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 878
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by kiwizook » Tue May 05, 2015 6:27 am

scottie, what diff's are you talking about? I could look around here for some, and send them over for you if you want?
It's not a question of how much you spend on your suzuki, but when your money will run out

User avatar
Fwb2700
Engaged 4wd low
Engaged 4wd low
Posts: 128
Joined: Wed Oct 08, 2014 8:10 am
Location: Palmerston North New Zealand

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by Fwb2700 » Tue May 05, 2015 7:43 am

I also have a few spare diffs in my shed may have what your after but I am sure they would be a lot cheaper in your part of the world
1984 Suzuki SJ410q Winch Truck (Work in Progress)

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by dan_2k_uk » Tue May 05, 2015 7:50 am

He's after some from a Maruti Gypsy which has Sammy axles but a 410 engine I think.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by ScottieJ » Tue May 05, 2015 8:10 am

dan_2k_uk wrote:He's after some from a Maruti Gypsy which has Sammy axles but a 410 engine I think.
Yes I'm after some MG410W diffs, from what I can find out they are samurai size but 4.11 ratio.
Zuki Build

Steady as she goes!

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by dan_2k_uk » Wed May 06, 2015 1:59 pm

So it turns out the front did need the spacer behind the ring gear. No idea if the ring and pinions differ or if my cases/carriers differ. Not to bothered as they are done and fitted and I had the ring gear spacer anyway but thought it worth a mention.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by dan_2k_uk » Thu Sep 10, 2015 10:11 am

Just doing a few bits to tidy up the cab.

Fed up with killing cheap headunits and wanted AUX input for my phone so got a little marine amplifier to replace the last cheap CD player.

Gives a bit of an audio boost and hopefully a bit harder to ruin. It has also freed up the space so the CB can now be heard as its speaker is no longer pointing straight at the head unit. While I was at it I've stripped out some old redundant wiring and generally tidied the rest of it. Also clocked the CB round a few degrees so it points a little towards the driver and pushes back a little further into the dash.

It's a pretty cool little unit that comes with a sealable bag with a pass through to put the phone/mp3 player in (My Nexus 6 won't fit) and all the other bits needed including a volume control knob for the dash.

Image


Volume control where the cigarette lighter used to be. I've wanted to move the socket away from the drivers knuckles for ages anyway as when somethings plugged in I'm forever knocking it. Will put it somewhere the passenger can operate it and make it permanently live for the camping fridge too.

Image


Moved the bonnet release lower to make space for the compressor previously so the old hole seemed like the logical place for the waterproof 3.5mm jack.

Image


Here's where the amp sits.

Image


Don't know what I'm going to do with all that extra space. Probably just blank it for now or get a CB speaker or a little cubby of some sort.

:D
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by ROBBIE » Sat Sep 12, 2015 11:04 am

How much on the amp, or got a link?
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dan's Suzuki Samurai build - Going backwards (sort of)

Post by dan_2k_uk » Sat Sep 12, 2015 2:48 pm

I paid £50 and annoyingly they are about £25 on Amazon.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dan's Suzuki Samurai build

Post by dan_2k_uk » Tue Nov 10, 2015 7:12 pm

Finally got a full size spare after the incident in Wales and having to go steady on a 31 for the second day and the journey home.

It's not got that much tread left on it but at least it's a decent tyre and the correct rolling circumference.

Plus it looks awesome with a 33 on the rear door. :)


Image


Image


Need to do a few bits for the MOT now as its been off the road for nearly 2 months but I've been a bit busy.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: Dan's Suzuki Samurai build

Post by zook123 » Wed Nov 11, 2015 12:47 pm

Almost makes the rear door disappear, well, I suppose if anyone crashes into the back of you they'll just bounce off!
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT


Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk

Post Reply