KJA cut n shut

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
stevepsj413
Engaged 4wd low
Engaged 4wd low
Posts: 193
Joined: Fri May 31, 2013 10:58 pm

KJA cut n shut

Post by stevepsj413 » Fri Aug 21, 2015 7:40 pm

Thought i'd share some photos on here of my latest project. Its a 1986 suzuki sj413 kja pickup, i got it of the guy who i got my hardtop samurai off, it had been sat in a field for the last 10+ years, most of the parts had long since been removed and used elsewhere and the rot had well and truly set in to the remains of the cab, but it did come with a spare cab, also rotten and a spare bed, which was only slightly rotten, the deal was done and it was mine! That was at the begining of March since then i've been flat out on it when im not at work. Its getting there slowly so heres the photos to show you.
Attachments
This was how it looked when i first saw it.
This was how it looked when i first saw it.
DSC_0181.jpg (616.84 KiB) Viewed 12851 times
DSC_0182.jpg
DSC_0182.jpg (611.46 KiB) Viewed 12851 times
The roof had a sunroof put in it which had rot all round it, it was totally shot round both A pillars, and the front bulkhead and floors were past repair, the only saveable part of the cab was the rear bulkhead and B pillars
The roof had a sunroof put in it which had rot all round it, it was totally shot round both A pillars, and the front bulkhead and floors were past repair, the only saveable part of the cab was the rear bulkhead and B pillars
DSC_0183.jpg (570.35 KiB) Viewed 12851 times
This is the other cab that came with it, it had sat in that spot for years and the rear bulkhead and B pillars were absolutely rotten, can you see what im thinking yet?
This is the other cab that came with it, it had sat in that spot for years and the rear bulkhead and B pillars were absolutely rotten, can you see what im thinking yet?
DSC_0184.jpg (664.29 KiB) Viewed 12851 times
DSC_0185.jpg
DSC_0185.jpg (631.28 KiB) Viewed 12851 times
8th March, towed it to my lock up on an a-frame
8th March, towed it to my lock up on an a-frame
DSC_0187.jpg (517.33 KiB) Viewed 12851 times
Got the prop shafts with it, and the transfer box with the prop brake was still on it.
Got the prop shafts with it, and the transfer box with the prop brake was still on it.
DSC_0189.jpg (529.71 KiB) Viewed 12851 times
Also got a bonnet with it.
Also got a bonnet with it.
DSC_0190.jpg (544.03 KiB) Viewed 12851 times
This is the bed i got with it, the metal arches are rotten and the bottom of the bulkhead and front bed mounts are also rotted out, the main part of the bed is solid tho.
This is the bed i got with it, the metal arches are rotten and the bottom of the bulkhead and front bed mounts are also rotted out, the main part of the bed is solid tho.
DSC_0192.jpg (501.44 KiB) Viewed 12851 times
The bed thats on it at the moment.
The bed thats on it at the moment.
DSC_0194.jpg (530.51 KiB) Viewed 12851 times
Original dealer sticker, i think it sums it up perfectly
Original dealer sticker, i think it sums it up perfectly
DSC_0195.jpg (475.25 KiB) Viewed 12851 times
Didnt get the other cab until 4th april, couldnt get a trailer till then, but i had done the work needed to the chassis
Didnt get the other cab until 4th april, couldnt get a trailer till then, but i had done the work needed to the chassis
DSC_0225 (2).jpg (521.6 KiB) Viewed 12851 times
The chassis needed a new rail welding in to fix the petrol tank to a couple of the bed mounts needed replacing and someone had cut the engine mounts off, i soon had these done. I'd taken the axles and running gear home and was refurbishing those in my garage at home.
The chassis needed a new rail welding in to fix the petrol tank to a couple of the bed mounts needed replacing and someone had cut the engine mounts off, i soon had these done. I'd taken the axles and running gear home and was refurbishing those in my garage at home.
DSC_0254.jpg (507.05 KiB) Viewed 12851 times
Next was onto cutting the B pillars off the black cab, i just used a spot weld drill round the roof and bottom of the sill panels and then cut across the floor with a grinder.
Next was onto cutting the B pillars off the black cab, i just used a spot weld drill round the roof and bottom of the sill panels and then cut across the floor with a grinder.
DSC_0235 (2).jpg (534.34 KiB) Viewed 12851 times
Then i did the same with the blue cab, drilled the same spot welds round the roof and sills and then cut the floor.
Then i did the same with the blue cab, drilled the same spot welds round the roof and sills and then cut the floor.
DSC_0262 (2).jpg (527.13 KiB) Viewed 12851 times
The two halves lined up well, even the spot welds i'd drilled all lined up
The two halves lined up well, even the spot welds i'd drilled all lined up
DSC_0263.jpg (546.93 KiB) Viewed 12851 times
Welded together and the doors lined up sweet as a nut.
Welded together and the doors lined up sweet as a nut.
DSC_0267.jpg (543.22 KiB) Viewed 12851 times
Left the floor to overlap by an inch and welded the top and bottom of it.
Left the floor to overlap by an inch and welded the top and bottom of it.
DSC_0268.jpg (548.9 KiB) Viewed 12851 times
Had a new rear tunnel because the old one was rotten, drilled the spots out and welded the new one in.
Had a new rear tunnel because the old one was rotten, drilled the spots out and welded the new one in.
DSC_0270.jpg (540.25 KiB) Viewed 12851 times
Next was the sills, grinder time again.
Next was the sills, grinder time again.
DSC_0273.jpg (549.85 KiB) Viewed 12851 times
Replaced with 90mm x 90mm 3mm wall box section.
Replaced with 90mm x 90mm 3mm wall box section.
DSC_0274.jpg (451.3 KiB) Viewed 12851 times
After a bit of seam sealering it was time for undercoat.
After a bit of seam sealering it was time for undercoat.
DSC_0276.jpg (468.18 KiB) Viewed 12851 times
DSC_0278.jpg
DSC_0278.jpg (488.07 KiB) Viewed 12851 times
Then topcoat, i went for the original suzuki quattro blue 26f paint, only got a little 25l compressor and im no painter, but for a first time spraying a car im happy enough with it.
Then topcoat, i went for the original suzuki quattro blue 26f paint, only got a little 25l compressor and im no painter, but for a first time spraying a car im happy enough with it.
DSC_0283.jpg (516.82 KiB) Viewed 12851 times
DSC_0284.jpg
DSC_0284.jpg (422.25 KiB) Viewed 12851 times
Top
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: KJA cut n shut

Post by donkeychomp » Fri Aug 21, 2015 8:04 pm

Bloody hell! I'm well impressed, top work matey.
If it ticks over...leave it
Top
User avatar
stevepsj413
Engaged 4wd low
Engaged 4wd low
Posts: 193
Joined: Fri May 31, 2013 10:58 pm

Re: KJA cut n shut

Post by stevepsj413 » Fri Aug 21, 2015 8:09 pm

Time to start re-assembly.
Attachments
Cab back on the chassis
Cab back on the chassis
DSC_0287.jpg (434.9 KiB) Viewed 12844 times
DSC_0288.jpg
DSC_0288.jpg (546.25 KiB) Viewed 12844 times
DSC_0289.jpg
DSC_0289.jpg (505.63 KiB) Viewed 12844 times
Steering wheel and dash wiring loom in.
Steering wheel and dash wiring loom in.
DSC_0291.jpg (564.68 KiB) Viewed 12844 times
DSC_0292.jpg
DSC_0292.jpg (528.17 KiB) Viewed 12844 times
Had no keys with it so i took the barrel to bits and filed the pins so it starts with the same key as my other samurai, also did the same to the door locks.
Had no keys with it so i took the barrel to bits and filed the pins so it starts with the same key as my other samurai, also did the same to the door locks.
DSC_0293.jpg (588.56 KiB) Viewed 12844 times
Had a passenger side wing and front panel off a samurai so i painted and fitted these next.
Had a passenger side wing and front panel off a samurai so i painted and fitted these next.
DSC_0294.jpg (559.21 KiB) Viewed 12844 times
DSC_0295.jpg
DSC_0295.jpg (488.25 KiB) Viewed 12844 times
Re-fitted back screen, left the sticker on.
Re-fitted back screen, left the sticker on.
DSC_0299.jpg (447.48 KiB) Viewed 12844 times
Then painted the bonnet and fitted an engine, put a 1.6 8v vitara carb lump in her.
Then painted the bonnet and fitted an engine, put a 1.6 8v vitara carb lump in her.
DSC_0306.jpg (502.37 KiB) Viewed 12844 times
DSC_0307.jpg
DSC_0307.jpg (444.53 KiB) Viewed 12844 times
Then repaired the bed, plated the bulkhead and put new bed mounts on it, i also cut the rotted archs off.
Then repaired the bed, plated the bulkhead and put new bed mounts on it, i also cut the rotted archs off.
DSC_0309.jpg (482.15 KiB) Viewed 12844 times
DSC_0310.jpg
DSC_0310.jpg (549.51 KiB) Viewed 12844 times
Then painted and undersealed it.
Then painted and undersealed it.
DSC_0311.jpg (548.9 KiB) Viewed 12844 times
DSC_0313.jpg
DSC_0313.jpg (523.35 KiB) Viewed 12844 times
Fitted back on the chassis
Fitted back on the chassis
DSC_0318.jpg (560.87 KiB) Viewed 12844 times
DSC_0317.jpg
DSC_0317.jpg (514.27 KiB) Viewed 12844 times
Needed some replacement archs...
Needed some replacement archs...
DSC_0322.jpg (535.76 KiB) Viewed 12844 times
...my mate got me some off his ride on lawnmower, painted them and fitted them.
...my mate got me some off his ride on lawnmower, painted them and fitted them.
DSC_0323.jpg (510.6 KiB) Viewed 12844 times
DSC_0324.jpg
DSC_0324.jpg (528.87 KiB) Viewed 12844 times
Front screen in
Front screen in
DSC_0326.jpg (406.01 KiB) Viewed 12844 times
The sides and back were past it so i got some 1" box section and a tall filing cabinet from work
The sides and back were past it so i got some 1" box section and a tall filing cabinet from work
DSC_0315.jpg (523.84 KiB) Viewed 12844 times
DSC_0330.jpg
DSC_0330.jpg (423.52 KiB) Viewed 12844 times
DSC_0328.jpg
DSC_0328.jpg (422.43 KiB) Viewed 12844 times
Fitted the sides, just waiting for the latches to arrive before i fit the back.
Fitted the sides, just waiting for the latches to arrive before i fit the back.
DSC_0333.jpg (456.84 KiB) Viewed 12844 times
Top
Martin86
Can I have a tow
Can I have a tow
Posts: 327
Joined: Tue Dec 21, 2010 10:05 pm
Location: Ipswich, Suffolk
Contact:
Contact Martin86

Re: KJA cut n shut

Post by Martin86 » Sat Aug 22, 2015 10:12 am

Wow 8-)
Top
User avatar
RickUK
Can I have a tow
Can I have a tow
Posts: 459
Joined: Sat Jan 09, 2010 7:31 pm
Location: Not sure me Tom Tom is bust,but it could be North of Watford Gap.Could be Bedfordshire though.
Contact:
Contact RickUK

Re: KJA cut n shut

Post by RickUK » Sat Aug 22, 2015 10:16 am

Must admit from the 1st photo to the last photo that is a rather stunning transformation,infact remarkable :doublethumbs:
Deceased.
SJ413 tinwormed to the great car grave yard in the sky.
Vitara LWB V6 engine deceased and also in the great grave yard in the sky.
www.hideones.info www.hideones.info
Current wheels.
BMW X5 Le Mans 3.0turbo diesel.
Looking for a newish Suzuki Jimny.
Top
User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: KJA cut n shut

Post by Tramp » Sat Aug 22, 2015 12:47 pm

Great work, looking fantastic, it's a shame you can't save the embossed 'suzuki' from the tailgate, but it's looking really well. You did well saving this Kia, better ones than that have been scrapped!
Top
User avatar
Rhinoman
Suzuki Guru
Suzuki Guru
Posts: 1034
Joined: Tue Mar 26, 2013 5:42 pm
Location: Brinkworth
Contact:
Contact Rhinoman

Re: KJA cut n shut

Post by Rhinoman » Sat Aug 22, 2015 2:02 pm

Good work, you were lucky to get the extra cab.
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: KJA cut n shut

Post by dan_2k_uk » Sat Aug 22, 2015 8:22 pm

Nice work. Another one saved.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: KJA cut n shut

Post by ROBBIE » Sun Aug 23, 2015 9:38 pm

Nice work mate, something to be proud of :salute:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
gamble63
Can I have a tow
Can I have a tow
Posts: 275
Joined: Tue May 06, 2014 9:50 pm

Re: KJA cut n shut

Post by gamble63 » Mon Aug 24, 2015 2:23 pm

amazing, that is very impressive!
Top
Post Reply

Return to “Builds and Projects”