Do I need this on the tow bar

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Do I need this on the tow bar

Post by dazerede » Sat Jul 23, 2016 4:22 pm

Can't fit this on with my back box is it needed it bolts to the chassis rail and to the bottom of the tow bar thanks
Attachments
image.jpeg
image.jpeg (135.6 KiB) Viewed 8763 times
image.jpeg
image.jpeg (162.3 KiB) Viewed 8763 times
image.jpeg
image.jpeg (113.2 KiB) Viewed 8763 times
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: Do I need this on the tow bar

Post by dazerede » Sat Jul 23, 2016 4:22 pm

And no I'm not removing the tow bar if anyone says that lol
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Do I need this on the tow bar

Post by Jordi » Sat Jul 23, 2016 4:55 pm

I would say so. Its a strengthening brace.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

SherwoodNash
Winching along now
Winching along now
Posts: 731
Joined: Sat Aug 09, 2014 11:05 am

Re: Do I need this on the tow bar

Post by SherwoodNash » Sat Jul 23, 2016 6:02 pm

Jordi wrote:I would say so. Its a strengthening brace.
I have the same tow bar as you, it was an original authorised Suzuki fitted part.

Image

When I fitted my new fuel tank recently, I took off the tow bar and that brace for access. I thought about not installing that bit too, just for cleaner lines but thought better of it, so it went back.

Also, you should have a 'sleeve' for the long bolt that sits inside the chassis member hole fixing point. Mind you don't tilt it when putting bolt in as easy to fall inside the box section and rattle around forever!

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: Do I need this on the tow bar

Post by dazerede » Sat Jul 23, 2016 10:25 pm

Ah ok guys will have to modify the bracket then cheers
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Do I need this on the tow bar

Post by andyrew » Sun Jul 24, 2016 9:12 am

My towbar is a similar design and doesnt have the brace. Some do
some dont. Id be more inclined to change the back box as that
looks like exhaust rattle mania.
Andys Rusty Suzuki Emporium

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Do I need this on the tow bar

Post by ROBBIE » Sun Jul 24, 2016 1:33 pm

I never had that bar on mine, never used it for towing only recovery. And yeah that looks well rattly
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

SherwoodNash
Winching along now
Winching along now
Posts: 731
Joined: Sat Aug 09, 2014 11:05 am

Re: Do I need this on the tow bar

Post by SherwoodNash » Sun Jul 24, 2016 3:37 pm

ROBBIE wrote:I never used it for towing only recovery.
I do both! I added a S/S 4Tonne D shackle :D

Image

Image

http://www.ebay.co.uk/itm/310607674262

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Do I need this on the tow bar

Post by ScottieJ » Mon Jul 25, 2016 10:19 am

Are those shackles actually tested and rated? Being only 12mm diameter I would not trust it for anything but a very light recovery. Considering rated 3.25T shackles usually have a 18+mm pin I highly doubt those can handle 4T. Personally I will only use tested and rated shackles with the correct markings for recovery, I have seen what can happen when recovery gear and points fail and it can be fatal.

Do they carry any of these markings?
https://www.prolyte.com/en/prolyte-camp ... g-shackles

http://www.electricwinchshop.co.uk/3-25 ... ackle.html
Zuki Build

Steady as she goes!

SherwoodNash
Winching along now
Winching along now
Posts: 731
Joined: Sat Aug 09, 2014 11:05 am

Re: Do I need this on the tow bar

Post by SherwoodNash » Mon Jul 25, 2016 10:53 am

It pulled out a Isuzu double cab 1 tonne pick up from a pub car park ditch OK.
I've learned from all those (especially Oz) recovery vids on YT, and followed all the rules.

Post Reply