sj axles
sj axles
can anyone help me?.can i put a front axle diff with its housing in a rear axle?.are they both identicle........ can i just withdraw half shafts and unbolt it from the axle housing then bolt it in to my rear axle?.
Re: sj axles
Short answer no you carnt.
Long answer is yes you can, but you need to strip the front diff down to change a few gears over from front to back for it to fit.
Long answer is yes you can, but you need to strip the front diff down to change a few gears over from front to back for it to fit.
Re: sj axles
sorted.is it a big job.wots involved mate..oh and thank u ...
Re: sj axles
In what? Changing a like for like diff or changing a front to back?
Re: sj axles
changing a front diff to a rear diff.do u know anybody that recons diffs.i have a pair of axles that r good(spare).but the rear diff on my sj is leaking and has a bit of play in bearings.(play in the diff bearing).
Re: sj axles
The play you can feel will be in the prop flange. This is the pinion bearing.
You could just replace the crush collor to stop it from leaking, but it would depend on how bad the bearing is and what you use it for.
To use the front in the back, you need to change the side gears. This requires the stripping down of both diffs. You will need impact guns ect to get them apart, and the diff you plan to re use will need to be set up properly. This will need to be done by a garage.
Hope this helps
You could just replace the crush collor to stop it from leaking, but it would depend on how bad the bearing is and what you use it for.
To use the front in the back, you need to change the side gears. This requires the stripping down of both diffs. You will need impact guns ect to get them apart, and the diff you plan to re use will need to be set up properly. This will need to be done by a garage.
Hope this helps
Re: sj axles
thanks mate.yes it does help.im just gunna get it done by the pro's.thank u.do u know anybody that rebuilds diffs in the hull area.
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: sj axles
I know a guy who might possibly be able to help with the diffs in north-east midlands, Matt Pearce. He's on the edge of Caistor, on Brigg Road, and runs a 4x4 specialist garage and also deals a few cars too. My SJ went there for a service and my Mum's 300TDI Disco is a regular visitor.
If you want to give him a ring: 01472 852266
And here's a picture of his garage from google maps: That's the only place I can think of, and I'm pretty sure I'm one of the closest people to you on the forum, 'cause I'm just on the other side of the Humber from Hull.
If you want to give him a ring: 01472 852266
And here's a picture of his garage from google maps: That's the only place I can think of, and I'm pretty sure I'm one of the closest people to you on the forum, 'cause I'm just on the other side of the Humber from Hull.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
Re: sj axles
thanks mate that has helped a lot will give him a ring when i get back to work on tuesday.i think i hav a good set of front seats at work out off my other sj they r high back and r gray too..will get in touch when i find them.thank u again
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: sj axles
Glad I could be of some help.ton24 wrote:thanks mate that has helped a lot will give him a ring when i get back to work on tuesday.i think i hav a good set of front seats at work out off my other sj they r high back and r gray too..will get in touch when i find them.thank u again
As for the seats, that's fantastic. Thanks a lot dude!
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.