Is this sort of thing any good?
http://www.ebay.co.uk/itm/BRAND-NEW-16- ... 9010844390" onclick="window.open(this.href);return false;
Pipe bending?
Re: Pipe bending?
They work well but it depends on what you are trying to make with it and how fussy you are. I am very fussy, that's why I was happy i got to use a jd2 bender when my cage was bent. The bends are so nice and even. This type of bender does crush tube when you bend it. I have built a few cages using a very similar bender. You may find them cheaper at machine mart
Re: Pipe bending?
I have one of these benders, theyre not bad. if you want to bend big stuff like cages etc then you need to pack the tubes with sand, gaffa tape the ends up then bend, other thing i found was that the formers work better if you clean the castings up so that they actuallty fit the tubing better. hope this helps
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Pipe bending?
how about this
- Attachments
-
- images.jpg (6.42 KiB) Viewed 10735 times
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
dominic
- Can I have a tow
- Posts: 482
- Joined: Mon Apr 14, 2008 7:48 pm
- Location: Ireland at the moment. originally London.
Re: Pipe bending?
Nice one Robbie,
Futurama's Bender is class.
Dom
Futurama's Bender is class.
Dom
Currently Drive
SJ 410 Q 1985 (GREEN)
VITARA GL+ 2017 (SILVER)
Did have a IGNIS SZ5 4X4 2017 (BLACK)
Did have a GRAND VITARA 2.0 TD 2002 (GREEN)
Did have a JIMNY JLX 2001 (RED)
Did have a SJ 413V 1987 (SILVER)
Did have a BMW320i 1984 (PETROL BLUE)
SJ 410 Q 1985 (GREEN)
VITARA GL+ 2017 (SILVER)
Did have a IGNIS SZ5 4X4 2017 (BLACK)
Did have a GRAND VITARA 2.0 TD 2002 (GREEN)
Did have a JIMNY JLX 2001 (RED)
Did have a SJ 413V 1987 (SILVER)
Did have a BMW320i 1984 (PETROL BLUE)
Re: Pipe bending?
Im using one on my cage. Had to put a sleeve in on of there former so it was tight around the steel tho!
Re: Pipe bending?
I found some pics on a post (Newby alert-Oct 2010) That's a very nice cagedunk wrote:They work well but it depends on what you are trying to make with it and how fussy you are. I am very fussy, that's why I was happy i got to use a jd2 bender when my cage was bent. The bends are so nice and even. This type of bender does crush tube when you bend it. I have built a few cages using a very similar bender. You may find them cheaper at machine mart
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Pipe bending?
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Re: Pipe bending?
That is a stunning tool and so quick too.Might be out of my price range.
-
vitara_mad
- Engaged 4wd low
- Posts: 135
- Joined: Thu Sep 15, 2011 10:05 pm
- Location: dronfield , derbyshire
Re: Pipe bending?
if i start saving now i might just be able to afford one in about 2511
