Scottie's Zuke. Blue

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Scottie's Zuke

Post by ScottieJ » Tue Sep 27, 2011 12:22 pm

sam16v wrote:nice work as usual Scottie. Lots of attention to detail. Inspires me to get cracking on mine, Keep it up!
Cheers matey :hands:
dan_2k_uk wrote:I hope you are aware that this is now a race?!?
Well you best crack on then Dan, my body went back on last night :thefinger:

However I now need to either lower the back or raise the front as it's not sitting flat with the extra weight of the engine and transmission up front
Zuki Build

Steady as she goes!

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Scottie's Zuke

Post by twiss » Tue Sep 27, 2011 4:57 pm

It's a 3-way race... can I learn to weld and fix my floor before scott and dan finish their zooks?

Probably :P

Edit: I dunno how fast you work dan, but if you're like scott you'll be months yet ;)
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Scottie's Zuke

Post by ScottieJ » Tue Sep 27, 2011 5:09 pm

:blah: I'd like to see how long it'd take you to do a ground up rebuild with lots of mods :thefinger: how longs yours been off the road eh needing only a few simple repairs :tongue:



;)
Zuki Build

Steady as she goes!

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Scottie's Zuke

Post by twiss » Tue Sep 27, 2011 5:22 pm

Only just over 6 months lol...

I have replaced the steering bar, the kingpins, the felt pads and oil seals, the sump gasket, the brake hoses, the calipers, the pads, the rear shoes, readjusted the rear brakes so they actually work, tidied the wiring in the engine bay, put a new snorkel on and re-wired some of the lights... I also fixed the interior light!!!

So it's not just been sitting there :P

The only bits I haven't done is the welding... and that's more because I'm cheap rather than lazy!
I don't see why I should spend £300 getting it welded when I can use my free time and some scrap metal to do it for nothing!!!
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
Team Pink
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Aug 21, 2011 5:48 pm

Re: Scottie's Zuke

Post by Team Pink » Tue Sep 27, 2011 6:15 pm

twiss wrote:Only just over 6 months lol...

I have replaced the steering bar, the kingpins, the felt pads and oil seals, the sump gasket, the brake hoses, the calipers, the pads, the rear shoes, readjusted the rear brakes so they actually work,

That is more or less prep between races + a full nuts and bolt check front to back and repair any breakages. 2 weeks worth at the most, what have you been doing for the other 5 1/2 months
:lol:

User avatar
rockwatt
Recommended Trader
Recommended Trader
Posts: 38
Joined: Thu Oct 28, 2010 3:07 pm

Re: Scottie's Zuke

Post by rockwatt » Tue Sep 27, 2011 9:51 pm

Team Pink wrote:
twiss wrote:Only just over 6 months lol...

I have replaced the steering bar, the kingpins, the felt pads and oil seals, the sump gasket, the brake hoses, the calipers, the pads, the rear shoes, readjusted the rear brakes so they actually work,

That is more or less prep between races + a full nuts and bolt check front to back and repair any breakages. 2 weeks worth at the most, what have you been doing for the other 5 1/2 months
:lol:
I did a coil job in 4 weeks !!!! So what you bleeting at twiss? Just get stuck in.
Rocklobster gears , refurb cases , dual cases , su manifolds , jimny rocklobster conversions inc speedo drive, t/case heavy duty mounting arms and rock buckets, bespoke fabrications and machining,
Contact me for details.

User avatar
Russ24
Can I have a tow
Can I have a tow
Posts: 438
Joined: Sun Jan 17, 2010 1:53 pm
Location: the forests of the northern hemisphere

Re: Scottie's Zuke

Post by Russ24 » Tue Sep 27, 2011 10:11 pm

rockwatt wrote:
Team Pink wrote:
twiss wrote:Only just over 6 months lol...

I have replaced the steering bar, the kingpins, the felt pads and oil seals, the sump gasket, the brake hoses, the calipers, the pads, the rear shoes, readjusted the rear brakes so they actually work,

That is more or less prep between races + a full nuts and bolt check front to back and repair any breakages. 2 weeks worth at the most, what have you been doing for the other 5 1/2 months
:lol:
I did a coil job in 4 weeks !!!! So what you bleeting at twiss? Just get stuck in.

am i in on this race.. i always start by drinking tea and spending 2 hours on you tube
Image
:russ:

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Scottie's Zuke

Post by ScottieJ » Wed Sep 28, 2011 12:40 am

:lol: :lol: Of course you can Russ :hands:

I think we all know that it's hard to find the time to get work done on the truck sometimes, no one on here can beat my housemate though, that range rover you see in my pics has had a blown transfer box since the 2010 difflock to the core weekender and he only decided to get the transfer box out 2 weeks ago :lol:
Zuki Build

Steady as she goes!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Scottie's Zuke

Post by ScottieJ » Wed Sep 28, 2011 1:07 am

I almost forgot! Pics :thefinger:

Twin electric fans (need to fix the wires on one though)
Image

Nice and Flat belly 16" from the floor
Image

Image

Front prop clearance
Image

Tcase tucked nicely into the gap
Image

Image

Image

and last but not least :guns: it stands 5ft10" tall, pretty low for 33s!
Image
Zuki Build

Steady as she goes!

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Scottie's Zuke

Post by twiss » Wed Sep 28, 2011 9:36 am

I'll have you know I've spent the last 5 1/2 months trying to find someone to do my welding for free :P
Unsuccessfully I might add!
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

Post Reply