Scottie's Zuke. Blue
-
rgonzobull
- Engaged 4wd low
- Posts: 185
- Joined: Sun Nov 28, 2010 8:16 pm
- Location: Manchester
Re: Scottie's Zuke
Ha ha Scott I bet its not number one priority. Looks like you got the bug back and getting a fair bit of progress on your SJ. Cant wait to see it on the road if we all get to meet up this year
LJ80Q
Re: Scottie's Zuke
No more pics at the moment but progress is being made 
started work on the rocksliders for the cage again and got chopping on the front arches to maximise uptravel! damn I didn't realise how much more i needed to cut out since moving the front axle forwards
I've gotta re-do the headlights again and move them forwards 15-20mm 
started work on the rocksliders for the cage again and got chopping on the front arches to maximise uptravel! damn I didn't realise how much more i needed to cut out since moving the front axle forwards
I've gotta re-do the headlights again and move them forwards 15-20mm -
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Scottie's Zuke
Have fun chopping it up again.
You going to have to cut into the headlight housing then. My VL stops dead inline with the back of it.
Dan
You going to have to cut into the headlight housing then. My VL stops dead inline with the back of it.
Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: Scottie's Zuke
yeah man, I think i'm just going to have to make new headlight housings, the arches are literally cut right up to the very bottm front edge of the wings
Re: Scottie's Zuke
I got a bit carried away with the angle grinder tonight 
I decided it was probably going to be easier building completely new inner arches than modify the old ones more.
This is with standard height bumpstops.
I decided it was probably going to be easier building completely new inner arches than modify the old ones more.This is with standard height bumpstops.
- IMAG0325.jpg (1.01 MiB) Viewed 5309 times
- IMAG0328.jpg (1.07 MiB) Viewed 5309 times
- IMAG0331.jpg (912.17 KiB) Viewed 5309 times
- IMAG0333.jpg (1.05 MiB) Viewed 5309 times
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Scottie's Zuke
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Scottie's Zuke
not a lot of the outer wing left any more looking good mate
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: Scottie's Zuke
Yeah if I had to cut anymore out there wouldn't be much point keeping the font clipROBBIE wrote:not a lot of the outer wing left any more looking good mate
Time to cut out the back arches again next, I'm going to build them from scratch as well. Plan is to cut out enough so that if I ever want to run 35s all ill need to do is lower the bumpstops
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Scottie's Zuke
dont get rid of the front clip, tube looks ok but i just like SJs to look like SJs
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Scottie's Zuke
and i did read somewhere someone called you SJ stealth. a monster in SJ body
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good