immobiliser systems

Got an electrical gremlin? Ask the question here.
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: immobiliser systems

Post by ianedwards » Wed Feb 01, 2012 8:47 pm

I seen this and thought hmmmm, looks like a good idea. Might just do it to mine. Nice one

Cheers Ian

User avatar
Christoff
Can I have a tow
Can I have a tow
Posts: 366
Joined: Sun Nov 21, 2010 2:43 pm
Location: Peak District

Re: immobiliser systems

Post by Christoff » Sat Feb 04, 2012 3:38 pm

Received the toad system today. Any ideas on wiring it in as there are no instructions

Image

Image

There's a control unit, two touch sensors for your keys, receiver for the dash with led which wires into a plug on the side of the CU

But how do I know where the bunch of wires goes from the CU?

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: immobiliser systems

Post by Darrell » Sat Feb 04, 2012 4:17 pm

Looks simple enough :thumbup:
Attachments
a540139-imob.JPG
a540139-imob.JPG (54.13 KiB) Viewed 7049 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: immobiliser systems

Post by Darrell » Sat Feb 04, 2012 4:40 pm

I've just had a read that the switched live needs to be live whist cranking so don't connect it to the radio supply wire.
Anywhere on the green highlight will do.
Attachments
Supply.jpg
Supply.jpg (66.93 KiB) Viewed 7046 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: immobiliser systems

Post by Edweird » Sat Feb 04, 2012 7:02 pm

I've got a great immobilizer in mine. It's called a manual choke. Most folks these days have never heard of 'em, 'cause Suzuki SJs are SO hipster.
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
Tramp
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2828
Joined: Fri Jul 25, 2008 10:09 pm
Location: Rotherham - South Yorkshire

Re: immobiliser systems

Post by Tramp » Sat Feb 04, 2012 7:41 pm

I had a gemini alarm immobilizer on my SJ when I bought it. It was a nice period accessory, except it kept triggering itself in the rain and it didn't always switch off. I lived with the niggles until me & the Mrs went shopping one day & it wouldn't switch off. We had to sit in medowhall car park while I poked & prodded the alarm whilst the alarm blared! Eventually it disarmed so when I got home I ripped it out.... disklock all the way now!
Last edited by Tramp on Sat Feb 04, 2012 7:58 pm, edited 1 time in total.

User avatar
Christoff
Can I have a tow
Can I have a tow
Posts: 366
Joined: Sun Nov 21, 2010 2:43 pm
Location: Peak District

Re: immobiliser systems

Post by Christoff » Sat Feb 04, 2012 7:44 pm

Ha ha thanks darrell.

With the control circuit wires that are taped together, do I just cut either the wire feed to the coil or signal to the starter and wire these two wires in so the current basically flows through the CU before the component?

The power and ignition wires I can just splice into the circuits I choose out of your diagram?

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: immobiliser systems

Post by Darrell » Sat Feb 04, 2012 8:15 pm

Christoff wrote:Ha ha thanks darrell.

With the control circuit wires that are taped together, do I just cut either the wire feed to the coil or signal to the starter and wire these two wires in so the current basically flows through the CU before the component? Yes, just break into the circuit where ever is convenient

The power and ignition wires I can just splice into the circuits I choose out of your diagram?
Attachments
toad.jpg
toad.jpg (49.11 KiB) Viewed 7032 times
toad 2.jpg
toad 2.jpg (65.95 KiB) Viewed 7032 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: immobiliser systems

Post by Darrell » Sat Feb 04, 2012 8:25 pm

The permanent live can come straight off the battery (via a fuse). If anybody cuts this wire it will not run as the relays inside the control unit could not be energised.
2005-GV 1600se, "Hell" What do I know!

Post Reply