Broken Throttle Cable..

Engine not running right? see if we can help you!
Post Reply
S1MON
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Apr 30, 2012 5:35 pm
Location: Devon
Contact:
Contact S1MON

Broken Throttle Cable..

Post by S1MON » Mon May 21, 2012 5:10 pm

Throttle cable snapped last night, on the pin that goes on the arm on the pedal. Tried to bodge it but I didn't have enough adjustment and it was just revving like hell.

I've rang all the local motorfactors and non of them do it.. Now i'm stuck with a DIY jobby.. Anyone know what i need exactly? I haven't taken the cable off yet, going to do that tomorrow so i've got something to compare.

Thanks for your help guys.
Top
User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:
Contact twiss

Re: Broken Throttle Cable..

Post by twiss » Mon May 21, 2012 5:30 pm

You can use bicycle brake cable and cable clamps (the ones you put the cable through then screw tight)
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Broken Throttle Cable..

Post by ROBBIE » Mon May 21, 2012 8:08 pm

i just use a bicycle brake cable. just had to file the nipple
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
S1MON
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Apr 30, 2012 5:35 pm
Location: Devon
Contact:
Contact S1MON

Re: Broken Throttle Cable..

Post by S1MON » Mon May 21, 2012 10:42 pm

ROBBIE wrote:i just use a bicycle brake cable. just had to file the nipple
Which end? for the throttle pedal?

I guess the other end locks with a screw? Because will have to feed it through the sleeve?
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Broken Throttle Cable..

Post by ROBBIE » Tue May 22, 2012 12:40 pm

S1MON wrote:
ROBBIE wrote:i just use a bicycle brake cable. just had to file the nipple
Which end? for the throttle pedal?

I guess the other end locks with a screw? Because will have to feed it through the sleeve?
The fat end nipple goes in the pedal
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
S1MON
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Apr 30, 2012 5:35 pm
Location: Devon
Contact:
Contact S1MON

Re: Broken Throttle Cable..

Post by S1MON » Tue May 22, 2012 5:23 pm

Just went and got this for £3.50 hopefully will work, will try it tomorrow.

Image
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Broken Throttle Cable..

Post by ROBBIE » Tue May 22, 2012 6:40 pm

Keep the end in the red circle
zook cable.jpg
zook cable.jpg (148.61 KiB) Viewed 6824 times
you will probably have to file it to fit
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
S1MON
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Apr 30, 2012 5:35 pm
Location: Devon
Contact:
Contact S1MON

Re: Broken Throttle Cable..

Post by S1MON » Tue May 22, 2012 7:44 pm

IIRC the pin that goes in the throttle pedal arm is alot smaller. I haven't taken the cable end out of the Carb yet so i'm unsure what it looks like, sure it will all make sense tomorrow.
Top
Post Reply

Return to “Engine”