New glove box door & lock

[b6mfd]

Iv got a new glove box door to replace my scratched one and it came with a new lock and keys. The door fits, but the lock and the bit that holds the lock is different. Does anyone know if I can get a bit for in the glove box so that the lock will work? Otherwise I will have to stick it back on eBay :(

[ianedwards]

Cant you change the new lock for the original one, or are they different?

Ian

[b6mfd]

No the locks are different, and the bit the lock sits in the glove box door.

[ROBBIE]

the door top pic is the same as my sammy so wont fit your 410 dash

[dan_2k_uk]

My sammy has the lock from the bottom pic glued into the door somehow by the previous owner.

[b6mfd]

ok thanks for confirmation mate!

[ScottieJ]

try unscrewing that? it's not original on a 410, I think someone has bodged a different lock into the existing glove box

[b6mfd]

I wondered if i could replace that bit to make the new one fit, but there seems to be a few bits missing like a black trim that would sit in the circular hole of the glove box / around the lock...and some screws to fit the lock to the door.
I will take that latch bit off and have a gander.....

[ScottieJ]

you don't need to replace it, I'm pretty sure the standard catch just uses the hole behind it.

[b6mfd]

ah ok, so i just need the little black trim that goes around the lock (if they are meant to have one?) and the screws....