Jay's SJ410 VBJA now sold :(

[Jay18]

So i thought it was about time i done a build thread on my SJ so here goes...

this is on the day i got the car 26/06/2010 (pics are bad quality as the phone i used was rubbish!)
cant seem to get the pics closer but you get the idea...

IMAG0078.jpg (5.65 KiB) Viewed 26407 times

IMAG0079.jpg (5.75 KiB) Viewed 26407 times

IMAG0081.jpg (5.95 KiB) Viewed 26407 times

IMAG0080.jpg (6.04 KiB) Viewed 26407 times

IMAG0082.jpg (4.27 KiB) Viewed 26407 times

IMAG0084.jpg (5.75 KiB) Viewed 26407 times

IMAG0083.jpg (4.15 KiB) Viewed 26407 times

so work began...

first thing i got was a tin of black hammerite so the painting began...
all the under side of the car was cleaned and i painted all of the bottom of the car and chassis..

IM001696.JPG (752.87 KiB) Viewed 26404 times

then i bought a nice new pair or front springs...

IMAGE_241.jpg (11.62 KiB) Viewed 26404 times

i treated the car with a set of standard size vitara wheels...

IMAGE_347.jpg (67.21 KiB) Viewed 26401 times

And then i had an idea, since the Suzuki SJ is well know for falling over i thought some 3" arches would go well with a set of vitara wideboy wheels...

i used two trailor arches cut down the middle and welded onto the car after cutting all the rust out but because of the amount of rust that was cut out i had to buy some sheet steel and patch up the gaps, then when cleaned and filled it looked great, here are the pics....

IM001727.jpg (758.05 KiB) Viewed 26401 times

IM001728.jpg (690.89 KiB) Viewed 26401 times

IM001729.jpg (757.89 KiB) Viewed 26401 times

IM001730.jpg (736.87 KiB) Viewed 26401 times

IM001731.jpg (740.82 KiB) Viewed 26401 times

IM001735.jpg (864.26 KiB) Viewed 26401 times

IM001736.jpg (821.99 KiB) Viewed 26401 times

IM001750.JPG (794.22 KiB) Viewed 26401 times

IM001754.JPG (721.68 KiB) Viewed 26401 times

IM001752.JPG (833.77 KiB) Viewed 26401 times

IM001753.JPG (821.04 KiB) Viewed 26401 times

IM001703.jpg (809.98 KiB) Viewed 26400 times

DSC00996.JPG (242.41 KiB) Viewed 26400 times

after all the welding was finished i undersealed all of the floor inside and out..

DSC00993.JPG (255.51 KiB) Viewed 26400 times

DSC00994.JPG (300.89 KiB) Viewed 26400 times

[Jay18]

DSC00995.JPG (236.07 KiB) Viewed 26397 times

i tinted the rear window myself aswel..

IMAGE_135.jpg (66.4 KiB) Viewed 26396 times

IMAGE_141.jpg (67.33 KiB) Viewed 26396 times

after all the hard work here is how she looks now...

IMG_0054.jpg (1.09 MiB) Viewed 26397 times

IMG_0055.jpg (1.03 MiB) Viewed 26397 times

IMG_0057.jpg (1011.2 KiB) Viewed 26397 times

IMG_0058.jpg (1.03 MiB) Viewed 26397 times

IMG_0059.jpg (894.93 KiB) Viewed 26397 times

With the pajero seats fitted with custom seat rails..

401578_3772898836964_158355025_n.jpg (164.47 KiB) Viewed 26397 times

bull bar fitted:

IMG_1429.jpg (1.04 MiB) Viewed 26397 times

IMG_1427.jpg (1.03 MiB) Viewed 26397 times

i am currently doing the rear springs, after taking nearly a whole day doing just one spring as i had to hack saw a bolt off to remove the spring and then had to walk 2 miles from my nans house where the car is kept back to my house to get a bolt for a replacement and then walked back up there...
so tomorrow hopefully i wil get the other spring fitted.....

[Darrell]

Well done for rescuing her. Thats quite a bit of rust you've cut out there
Those springs are normally a pain in the ar*e. Chucked grease all over mine but the buggers still rusted together

http://suzukiclubuk.co.uk/forum1/viewto ... 15/t,3717/

[Jay18]

looks like we had the same problem, the spring mount bolt wouldnt come out of mine so i had to cut it out with a hacksaw then i found that the bolt had rusted and expanded so i couldnt pull it out so i had to get a new bolt from home to replace it, think im going to have to do the same thing the other side but ive got a second bolt so im prepared, this has been a big project mainly taking alot of time since im unemployed and just finished college aswel but its getting close to the M.O.T...

[b6mfd]

Makes me a feel a little better that's a lot of work youv done!

[Edweird]

That wheel-arch job is the dogs unmentionables! You had huge holes to fill and yet the outside is smoother than....a very smooth thing.

[Jay18]

thanks guys! it has took a lot of work to get to where it is now, just little bits to get a mot now and i did spend weeks and weeks on filling and sanding to get a good finish, just need a few more coats of paint and it should look very clean and smooth...

[Tramp]

very nice looking, I like how you've added the box section to your sills to mate your extended wheel arches together it almost looks standard but loads more functional!

Great job!

[Jay18]

thanks! when we finished the arches i thought it looked a bit wierd then i found some 3" by 2" box and it fitted perfectly to the width of the arches and works great as a side step, after standing on it and finding its completely solid i then thought id test the arches and i can bounce up and down on all 4 arches and the dont move at all so it is all very strong ...

[ScottieJ]

Nice work, came out real good.

I do have to admit I still think you should trim the front of the front arches up to the bottom of the front wings though. It will look a lot cleaner I think.