Could you please tell me which carb this is please?

[slaterfett]

Hi folks, first post. Could someone please tell me if they have a carb like this on the SJ. Basically The samurai i bought had this carb fitted, but the engine will not tick over and I'm finding it hard to located where everything should go

Checked all electrics and put a little fuel straight in the carb and the engine ticked over. Looks like the jet is blocked or knackered

Part numbers on carb are: AISAN 8F25

Thanks in advance

[Jay18]

Aisan is the manufacturer of the carb, it is the standard carb for the 413/ samurai, but i dont know about what goes where on them as i have a 410 so completely different carb so i cant help you there...

[ScottieJ]

The stock carbs are good when new, but 20 years down the line they are a bit crap to say the least

Here's a clean up guide http://www.suzukiclubuk.co.uk/diy/15-en ... down-guide

If you do that and it still has issues then I would suggest spending a bit of cash on an SU carb and modified inlet manifold to improve the running and power of the engine.

[Darrell]

to the club. Pdf file of the carb here if it's any help.
http://www.4x4.in.th/manual_sj413/chapter4.pdf

[twiss]

I always agree with replacing the standard carb. They are a good carb when they work properly but can be a giant pain in the arse if they aren't working. Overly complicated when they dont need to be!

Throw it at next doors dog and get yourself and SU, a weber or a nikki

[Darrell]

Give it to me , I'll throw it at my neighbours dogs as there a dam noisy nusiance