any one know what the thread is on the engine block holes are on a 1.6 vitara?
they are not m8, but is suspect metric fine.
just found my steering pump is hanging off and although i have hundreds of bolts none will thread in, the one remaining bolt will not fit any of my nuts either.
hope someone will know
thanks
shaun
vitara nuts and bolts
-
plugspanner
- Engaged 4wd low
- Posts: 179
- Joined: Tue Nov 20, 2012 4:35 pm
- Location: somerset
- Contact:
Re: vitara nuts and bolts
Yes they are all metric M8x1.25. If you give me some lengths I can send you some, I have 100s of suzuki bolts 
-
plugspanner
- Engaged 4wd low
- Posts: 179
- Joined: Tue Nov 20, 2012 4:35 pm
- Location: somerset
- Contact:
Re: vitara nuts and bolts
that is very kind of you, most of mine are much smaller motorbike bolts.
a selection of lengths from 25mm L onwards would be ok
do you want me to pm my address and how much do you want for them?
thanks
shaun
a selection of lengths from 25mm L onwards would be ok
do you want me to pm my address and how much do you want for them?
thanks
shaun
-
vitara_mad
- Engaged 4wd low
- Posts: 135
- Joined: Thu Sep 15, 2011 10:05 pm
- Location: dronfield , derbyshire
Re: vitara nuts and bolts
standard m8 bolts are 1.25
ive also got 1000's of bolts out of suzuki's
try running a tap through the threads to clean them out
ive also got 1000's of bolts out of suzuki's
try running a tap through the threads to clean them out