Kiwizook's resto

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Kiwizook's resto

Post by kiwizook » Fri Dec 28, 2012 8:37 pm

This is my beautifull new pickup
my truck in it's not so full glory
my truck in it's not so full glory
Pic_1228_007.jpg (21.23 KiB) Viewed 15946 times
It's a sj410, mostly stock standart.
The carburettor has issues at the moment which I am trying to sort out.
I already replaced the cv joint's, and replaced the knuckle joint seals. I also checked and cleaned all the brakes, and put on a new handbrake cable which cost me a sad $95

I am currently planning to restorate it, and keep it mostly stock standart as is. I have started to cut some of the rust out of the bodywork. The floor pans are buggered, and the cab has some rust on it too. the fuel tank supports are rotted real bad, so will also need replacing. The corners of the bumper were rotted out too, so i'm working on welding a new bumper.

here's some pics of the damage i have done so far :D
the wheel arch
the wheel arch
Pic_1228_008.jpg (16.07 KiB) Viewed 15946 times
the footwell
the footwell
Pic_1228_014.jpg (17.09 KiB) Viewed 15946 times
rust being cut away slowly by me
rust being cut away slowly by me
Pic_1228_017.jpg (18.79 KiB) Viewed 15946 times
and more
and more
Pic_1228_020.jpg (18.58 KiB) Viewed 15946 times
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
palmer
Got muddy boots
Got muddy boots
Posts: 91
Joined: Sun Apr 15, 2012 7:11 pm
Location: bury st edmunds, suffolk

Re: Kiwizook's resto

Post by palmer » Fri Dec 28, 2012 8:47 pm

Looks like a good project, are sj's big in new zealand? Also :welcome:
1.3 engine
Webber carb
Roll cage
Spoa
32 mm wheelspacers
Extended brake lines
31" Bronco Grizzerly Claws

MONSTER ENERGY DISCO KILLER!!
Top
User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: Kiwizook's resto

Post by dazerede » Fri Dec 28, 2012 8:51 pm

Looks good

Is this 410 a lwb sj as it looks abit longer
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Kiwizook's resto

Post by kiwizook » Fri Dec 28, 2012 8:53 pm

There a a few sj's floating around here in new zealand, but not as much as in the uk, which makes parts quite expensive down here, but I'll have to deal with that.

I will measure the wheel base, and see if it is a lwb. the cab is quite short, so it might just look like it, but I'll let you know
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
mk1joe
Winching along now
Winching along now
Posts: 707
Joined: Tue Mar 16, 2010 8:34 pm
Location: gosport

Re: Kiwizook's resto

Post by mk1joe » Fri Dec 28, 2012 8:55 pm

wow! that's very rare! i didn't think the 410 pickup was ever available in the UK?
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Kiwizook's resto

Post by kiwizook » Fri Dec 28, 2012 8:58 pm

That's why it is in New Zealand :D
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: Kiwizook's resto

Post by dazerede » Fri Dec 28, 2012 9:02 pm

That is Kool I want a lwb sj 410

U got any pics of it before u took the back off of it as we love pics
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Kiwizook's resto

Post by kiwizook » Fri Dec 28, 2012 9:07 pm

the wheelbase is about 2350, so I guess it is a lwb
I don't have any pic's with the back on, as it was already off when I bough it.
I gotta fix the back and put it back on, and i'll get some pics when I'm doin that
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11621
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Kiwizook's resto

Post by ScottieJ » Fri Dec 28, 2012 9:17 pm

:welcome: to :suzuki:clubuk Nice choice for a project! There's not many sj410k's around anywhere I don't think! We got the sj413kja dropside pickup in the UK but I'm not sure if we got the 410k here????

Look forward to seeing the build progress!
Zuki Build

Steady as she goes!
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Kiwizook's resto

Post by dan_2k_uk » Fri Dec 28, 2012 9:19 pm

:welcome:

Never seen a 410k either. Nice :D
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
Post Reply

Return to “Builds and Projects”