.
Suzuki's to the rescue...
Re: Suzuki's to the rescue...
My mate went out for a play in his S3 yesterday "no problem its a quattro" a hour later i get a phone call and he's stuck in 2" of snow .
.86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Suzuki's to the rescue...
Glad to see that ended well.
I'm not sure what some people think. Whether it's quattro drivers or range rover. Just because its 4wd it doesn't mean you can go anywhere.
All his electric automatic sensor garbage. Basic is better! Lol plus the £1000s we've all spent and the many many hours building.
Ok, so the cold air almost stopped my fun, but 10minutes of tinkering and we were away again.
Jordi
I'm not sure what some people think. Whether it's quattro drivers or range rover. Just because its 4wd it doesn't mean you can go anywhere.
All his electric automatic sensor garbage. Basic is better! Lol plus the £1000s we've all spent and the many many hours building.
Ok, so the cold air almost stopped my fun, but 10minutes of tinkering and we were away again.
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Suzuki's to the rescue...
What recovery point is on that bumper ferris
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
-
Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: Suzuki's to the rescue...
HAHAHA! Four wheel drive only helps you get moving. You need decent tyres to control it.....which I don't have.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
Re: Suzuki's to the rescue...
Well i only had 1 bow shackle that would fit the recovery eyes on my rear bumper and i had to use that on the audi. So i just looped the rope round the end of my bumperdazerede wrote:
What recovery point is on that bumper ferris
.86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Suzuki's to the rescue...
[quote="dazer "HAWK EYES" ede"]
What recovery point is on that bumper ferris[/quote]
What recovery point is on that bumper ferris[/quote]
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Suzuki's to the rescue...
Ha ha. Love it. At least Ferris knows the bumpers ok.
As long as everything was stamped up and marked correctly. And he worked out the EP. Lol
Suzuki - approved recovery - "of course it's ok, i bolted it on"
Jordi
As long as everything was stamped up and marked correctly. And he worked out the EP. Lol
Suzuki - approved recovery - "of course it's ok, i bolted it on"
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Suzuki's to the rescue...
Gave my bumper its first test this weekend
As you all know this Landrover was stuck in a couple of inches of fluffy snow on the side of the by-way.
I had to drag it for miles while smashing through all these big snow drifts to the sound of the A-Team theme while Scottie was giving covering fire as a whole squadron of soldiers came over the hill flanked by 4 Apache gunships......
As you all know this Landrover was stuck in a couple of inches of fluffy snow on the side of the by-way.
I had to drag it for miles while smashing through all these big snow drifts to the sound of the A-Team theme while Scottie was giving covering fire as a whole squadron of soldiers came over the hill flanked by 4 Apache gunships......
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Suzuki's to the rescue...
Looks like he's pulling you out backwards. You'll have to have a word with the photographer. Must be the angle they're stood at.
Jordi
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank