standard wheel size
standard wheel size
Ive put vitara fat boy alloys (10 inches wide) with new 31 10.50 15 tyres on my sj and to be honest it isnt that impressive.
Looking at it i can see that when pumped up the side walls are 12 inches wide but the tread is only 8 inches wide (Mt mud terrain)
So im going to have to sell them even tho they look sweet
Ive got both types of the standard steel wheels (the round hole ones and the triangle ones) and i was thinking insa turbo special track tyres, anyone know what size i can go for without having the same prob? It would be nice to keep it 30-31 inch high on the tyre, Thx
Looking at it i can see that when pumped up the side walls are 12 inches wide but the tread is only 8 inches wide (Mt mud terrain)
So im going to have to sell them even tho they look sweet
Ive got both types of the standard steel wheels (the round hole ones and the triangle ones) and i was thinking insa turbo special track tyres, anyone know what size i can go for without having the same prob? It would be nice to keep it 30-31 inch high on the tyre, Thx
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: standard wheel size
Looking at this on standard 15x5.5" SJ rims max tyres is a 215/75.
http://forum.suzukiclubuk.co.uk/vi ... ,14/t,226/
30" tyres ideally need a 6.5" rim i think. The 31s should be on an 8" rim but smaller is possible.
Jordi
http://forum.suzukiclubuk.co.uk/vi ... ,14/t,226/
30" tyres ideally need a 6.5" rim i think. The 31s should be on an 8" rim but smaller is possible.
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: standard wheel size
If your selling the 31s. Where are you? How much? What tyres? And pics!!!!
Thanks
Jordi
Thanks
Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Re: standard wheel size
10" wheels are far too wide for 10.5" wide tyres.
The minimum width tyre I would run on 10" wheels is 12.5" I used to run 11.5" wide tyres on them and had problems with the tyre popping off the bead.
The minimum width tyre I would run on 10" wheels is 12.5" I used to run 11.5" wide tyres on them and had problems with the tyre popping off the bead.
Re: standard wheel size
They are the sexy looking vitara fat boy alloys with 31 10.50 15 mud terrain (2 months old)
Will be about £300
Will be about £300
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: standard wheel size
Got some pics?
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Re: standard wheel size
Mt mud terrain tread
- Attachments
-
- 421059_10151186136266120_1986137609_n.jpg (83.41 KiB) Viewed 6722 times
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: standard wheel size
Nice. I'll have a word with my Dad. I only want the wheels. But he may be interested in the tyres.
Also got a mate looking for tyes for his HiLux.
Are you sure they're 15x10s, they don't look to be sat too bad.
What are the tyres? Brand/tread pattern?
Cheers
Also got a mate looking for tyes for his HiLux.
Are you sure they're 15x10s, they don't look to be sat too bad.
What are the tyres? Brand/tread pattern?
Cheers
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Re: standard wheel size
Here u can see the tread pattern alittle better
Yea they are 15x10 they had 265 road tyres on (which i still have and cost me just over £200) then i bought the king pin tracker mud terrain new which was £350. By the time they were fitted on the rims they stood me in around £600 lol.
Used them maybe 4-5 times which was good but for what we do offroad i would probley rather try and find some insa turbo special tracks on 7-8 inch wide steel rims (which i cant find yet)
Yea they are 15x10 they had 265 road tyres on (which i still have and cost me just over £200) then i bought the king pin tracker mud terrain new which was £350. By the time they were fitted on the rims they stood me in around £600 lol.
Used them maybe 4-5 times which was good but for what we do offroad i would probley rather try and find some insa turbo special tracks on 7-8 inch wide steel rims (which i cant find yet)
- Attachments
-
- 737787_10151186136596120_730669910_o.jpg (436.93 KiB) Viewed 6712 times