Pics And Help With Putting Sami Axles On A 410
-
Famerbennie
- Engaged 4wd low
- Posts: 114
- Joined: Mon Apr 25, 2011 2:23 pm
- Location: Chelmsford
Pics And Help With Putting Sami Axles On A 410
Can Anyone Help Or Has Any Pics Of Sami Axles On A 410/413
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Pics And Help With Putting Sami Axles On A 410
All i know is the saddles need moving in 40mm http://forum.suzukiclubuk.co.uk/vi ... 12/t,2801/
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Re: Pics And Help With Putting Sami Axles On A 410
Here's a guide but you need to put this link into google translate
http://pirate4x4.no/forum/showthread.ph ... uraiaksler
Some of the measurements are wrong though, use the measurements from the thread Jordi linked as those are 100% correct.
basically it's easy, you just need to make sure that the perches stay at exactly the same angle as they were originally to keep the caster and prop UJ angles correct.
The diff side perch, needs modifying so because it ends up partially on the diff housing, so make sure you take your time to get this as flat as possible
This is mine but my axle is far from standard.
http://pirate4x4.no/forum/showthread.ph ... uraiaksler
Some of the measurements are wrong though, use the measurements from the thread Jordi linked as those are 100% correct.
basically it's easy, you just need to make sure that the perches stay at exactly the same angle as they were originally to keep the caster and prop UJ angles correct.
The diff side perch, needs modifying so because it ends up partially on the diff housing, so make sure you take your time to get this as flat as possible
This is mine but my axle is far from standard.
- image.jpg (2.5 MiB) Viewed 3157 times