props

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
damo
Got muddy boots
Got muddy boots
Posts: 45
Joined: Sat Dec 08, 2012 12:35 am

props

Post by damo » Wed Apr 03, 2013 7:22 pm

any one know if the front and rear props on the 413 are the same or diffrent?
also would a prop off of a 410 fit on a 413. cheers damo

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: props

Post by ROBBIE » Wed Apr 03, 2013 7:36 pm

Front is longer if that helps
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

damo
Got muddy boots
Got muddy boots
Posts: 45
Joined: Sat Dec 08, 2012 12:35 am

Re: props

Post by damo » Wed Apr 03, 2013 8:01 pm

thought it was but i havnt looked to be honest wi you robbie. do u know if the 410 rear is same as 413?

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: props

Post by ScottieJ » Wed Apr 03, 2013 9:44 pm

Front props are quite a bit longer than rear props.

410 propshafts are about 1" longer than 413 and samurai propshafts because the diffs are shorter.
So they can be useful on lifted SJs.

Early skinny 410 props have a differnet bolt pattern

later samurais have a different bolt pattern and use larger 10mm bolts
Zuki Build

Steady as she goes!

Post Reply