wheel studs needed brand new

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

wheel studs needed brand new

Post by dazerede » Sat Apr 27, 2013 4:39 pm

Can anybody help me as I am wanting 18 new I mean new wheel stud bolts
Plus 8 washers and bolts to hold the drum onto the shafts

As the studs that hold the drum on is the same size as the ones that hold the wheel on

I have around hand ones but I want new ones as some are crossthreaded and a bit damaged
Attachments
IMAG0300.jpg
IMAG0300.jpg (1.01 MiB) Viewed 5270 times
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: wheel studs needed brand new

Post by dazerede » Sat Apr 27, 2013 4:41 pm

Also I need a new wheel spacer stud it is a 30mm wheel spacer looks like this
Attachments
IMAG0305.jpg
IMAG0305.jpg (874.56 KiB) Viewed 5268 times
IMAG0306.jpg
IMAG0306.jpg (962.32 KiB) Viewed 5268 times
IMAG0307.jpg
IMAG0307.jpg (834.51 KiB) Viewed 5268 times
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: wheel studs needed brand new

Post by dazerede » Sat Apr 27, 2013 4:44 pm

Also I need a couple of these that hold the copper pipe into the cylinder I need them new aswell
Attachments
IMAG0301.jpg
IMAG0301.jpg (950.54 KiB) Viewed 5265 times
IMAG0303.jpg
IMAG0303.jpg (776.86 KiB) Viewed 5265 times
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Re: wheel studs needed brand new

Post by Ladaman » Sat Apr 27, 2013 6:01 pm

The brake pipe nut is an easy one.

If you go to a motor spares shop they will be able to make you a new brake pipe with the correct nuts. Just remember to take the nut, an old bit of pipe to show them the type of flare needed, and the length.

I cant help with the stripped studs, but someone else will I'm sure.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: wheel studs needed brand new

Post by Darrell » Sat Apr 27, 2013 10:23 pm

Attachments
SJ studs.jpg
SJ studs.jpg (136.32 KiB) Viewed 5238 times
2005-GV 1600se, "Hell" What do I know!

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: wheel studs needed brand new

Post by dazerede » Sun Apr 28, 2013 9:04 am

Ye i seen them washers and nuts but im a after the bolts aswell

Ye going to POP up to motor parts direct on tuesday to sort out the cylinder thing
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: wheel studs needed brand new

Post by Darrell » Sun Apr 28, 2013 10:26 am

This is the only site in the UK I can find selling any. http://www.walldonwaypartsshop.co.uk/pr ... 9119-12003 They only have 6, you may end up going to a main stealer for them :thumbdown:
2005-GV 1600se, "Hell" What do I know!

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: wheel studs needed brand new

Post by dazerede » Sun Apr 28, 2013 1:14 pm

Yep that's the ones darrell but I need 15 but they only have 6 in stock

Mmm must call Suzuki sanfords then

Chears darrell
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: wheel studs needed brand new

Post by dazerede » Sun Apr 28, 2013 1:49 pm

Right I have sorted out my wheel spacer problems I emailed a few people who sell spacers and they told me to buy this ok they are a bit longer and wrong colour but its all good

Click Here for Ebay Listing


1/3 problems sorted
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

Post Reply