Samurai 1.3 gearbox into an sj410

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
ojr1979
Got muddy boots
Got muddy boots
Posts: 78
Joined: Fri Feb 08, 2013 8:22 pm

Samurai 1.3 gearbox into an sj410

Post by ojr1979 » Sun May 05, 2013 4:55 pm

Hi newbie here just after some advice? Got myself an sj410 first registered 10/04/1985 and I want to put a 5 speed gearbox into it instead of its 4 speed gearbox I was told this was possible very easily so I bought myself a 5 speed samurai 1.3 gearbox.I know I will need a 1.3 samurai clutch as the splined shaft is wider etc but I finally took the 4 speed box out and looked at the faces of each to see if the bolt holes were the same? I think they look different to me so was wandering what others thought? Is it even possible to fit? Here is a pic of both the 5 speed on the left and 4 speed to the right! The lugs on the 5 speed were cut off by the person I bought the box off so that's another job in itself! Any advice appreciated! Cheers
Attachments
image.jpg
image.jpg (399.23 KiB) Viewed 7123 times

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Samurai 1.3 gearbox into an sj410

Post by Jordi » Sun May 05, 2013 5:00 pm

You can get a 5sp 410 box. Thats the easiest swap.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: Samurai 1.3 gearbox into an sj410

Post by dazerede » Sun May 05, 2013 5:27 pm

I have never heard of anybody putting a samurai 1.3 gearbox to a 410

I have a 5 speed box on my 410 there ain't that many 5 speed 410 gear boxes around
I got mine for 5 quid but cost me 7 quid to get it

My 410 5 speed box bolted straight in piece of cake took 30 mins but then noticed it was in gear and the gear leave wasn't in yet so that took a while to sort out


Havnt tested it yet lol

It's only been in 1st 2nd and 3 rd gear so far and abit of 4 gear as its not on the road yet

Some say its no difference on 4th gear and 5th gear
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

ojr1979
Got muddy boots
Got muddy boots
Posts: 78
Joined: Fri Feb 08, 2013 8:22 pm

Re: Samurai 1.3 gearbox into an sj410

Post by ojr1979 » Sun May 05, 2013 5:41 pm

Looks like I shouldn't believe everything I'm told then.Well if anyone on here has one in good condition all works fine etc I'd be happy to buy a 5 speed 410 gearbox or do a swap for the sammy box???

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Samurai 1.3 gearbox into an sj410

Post by Darrell » Sun May 05, 2013 7:00 pm

Yes you need the 410 5 speed box :bawling:
May require some modifying of the mounting bracket on the rear as well depending on what you have now

http://forum.suzukiclubuk.co.uk/vi ... =12&t=3855
2005-GV 1600se, "Hell" What do I know!

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Samurai 1.3 gearbox into an sj410

Post by donkeychomp » Sun May 05, 2013 10:51 pm

My first SJ was a 410 with a 5 speed box...5th gear was more like an overdrive function really, it just lowered the revs at top speed.

Not that top speed was very much...
If it ticks over...leave it

User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 878
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Samurai 1.3 gearbox into an sj410

Post by kiwizook » Mon May 06, 2013 6:45 am

I believe you can use the gears out of the 1.3 5 speed box, and put them in the 1.0 4 speed case to get a 1.0 5 speed box? just wait for some others to reply, they'll know more about this if I'm right
It's not a question of how much you spend on your suzuki, but when your money will run out

ojr1979
Got muddy boots
Got muddy boots
Posts: 78
Joined: Fri Feb 08, 2013 8:22 pm

Re: Samurai 1.3 gearbox into an sj410

Post by ojr1979 » Mon May 06, 2013 11:09 am

Hhhmmm that's interesting! Wander if anyone's ever done it and took lots of photos to show how its done? Would be very handy indeed!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Samurai 1.3 gearbox into an sj410

Post by ScottieJ » Mon May 06, 2013 11:17 am

Zuki Build

Steady as she goes!

Post Reply