Jay's SJ410 VBJA now sold :(

[Jay18]

well she is a girl afterall lol, and never seen one in the uk with a bonnet bra so it would make mine stand out from others a bit more..

[Jay18]

UPDATE:

as a few of you have probably already seen on Facebook, ive been working on the zuk again and fitted a parcel shelf now i have a tidy boot, still a bit to do though..

i started by fitting my new CB mount with the antena i already had...

IMG_3423.jpg (712.53 KiB) Viewed 6850 times

IMG_3418.jpg (1.1 MiB) Viewed 6850 times

so yesterday I started to build the box for the boot, just a 21" high wall and a parcel shelf sitting 19" from the boot floor, that gives me a 2" lip so that if i have anything on the parcel shelf it wont come flying at me when i brake...

IMG_3419.jpg (1.09 MiB) Viewed 6850 times

IMG_3421.jpg (1.21 MiB) Viewed 6850 times

today i cut two holes in the parcel shelf for my 6x9's and a hole in the wall for my 10" sub and wrapped the parcel shelf and the front face of the wall...

also got my voltmeter wired in and my cd player and amplifier wired up and working, just need a way of having my sub working aswel, i have wired the 2 6x9's into the 2 channel amplifier but need to bridge the sub, is there any way of having my 2 6x9's wired in stereo and the sub bridged mono on the same amp?

anyhow, here are the pics...

IMG_3435.jpg (1.04 MiB) Viewed 6850 times

IMG_3436.jpg (1004.3 KiB) Viewed 6850 times

IMG_3437.jpg (1.07 MiB) Viewed 6850 times

IMG_3438.jpg (1014.56 KiB) Viewed 6850 times

TO DO:
fix glovebox lid
make end panels in back
make side panels in front
soundproof everything
make latch to stop rear door slamming in wind
fit 4 more speakers
fit fuse box in back for; towing electrics, cigarette lighter socket for fridge, inverter, etc
make subwoofer box
box in the 6x9's
make box for CB to go between the seats (between 6x9's)


more work tomorrow so ill see how far i can go with it, im also going to make a headliner and make panels for all of the rear, will also try and get my central locking and alarm system fitted tomorrow...

[Jordi]

Tidy work Jay.

The covering looks spot on. What do you use?

[Jay18]

thanks mate...

its just a think matting, like van matting, i used pva glue to glue it down and stapled it in place to make sure it doesnt come off at the edges...

got to find some more and do the inside of the box too, just to tidy it up a bit more...

[Jordi]

Cool, i'll be waiting for more pics to see how it turns out.

I heard acoustic matting is good to use but i've never tried it.

[Jay18]

this stuff basically seems like the same stuff as acoustic matting, its brilliant and makes it look so clean and tidy, going to cover everything, so theres no metal showing on the interior, or as little as possible, just to make it feel more cosy, i use this as my daily drive so want it to be as nice inside as possible, i plan on keeping it for a long time so i may aswel spend the money on it, i plan to put a 1.3 injection in it after a year so my insurance is a bit cheaper then, was going to go with 1.6 mpfi but tax goes up to £225 a year apparently so want to keep it small engined but fuel i njected for better fuel economy and a bit more reliable than carb...

i will post pics when im done tomorrow...

[turbo-tom]

Looking goo you sure you 410 alternator is big enough for all them electronics planned

[littlesammy]

Looks fantastic.!

[littlesammy]

Looks fantastic.!

[Jay18]

my alternator is charging at 15v at the moment, so need a new one anyway so ill try and get a high output one...

going to fit a leisure battery in the boot to power all my new electrics, sol if it all drains the battery it doesnt really matter cause the main battery with still be full..

got a few more pics...

1013936_622016444475521_646554029_n.jpg (68.52 KiB) Viewed 6798 times

1044333_622016497808849_791026164_n.jpg (84.69 KiB) Viewed 6798 times

580173_622016401142192_408054470_n.jpg (80.36 KiB) Viewed 6798 times

6185_622016354475530_1815035608_n.jpg (70.3 KiB) Viewed 6798 times

on the 26th of june i had the zuk 3 years so for a treat it got this... a tow bar..

1000685_623319104345255_981767097_n.jpg (85.55 KiB) Viewed 6798 times