Indicators working but no hazzards
Indicators working but no hazzards
On my Blitz the indicators work both left and right but when I put on the hazzards only the drivers side flash, but if I put the indicator down for the left they then work???? I have tried a spurious flasher relay but this doesn`t work anything. I`ve another Suzuki flasher relay to try but this was not at hand last night any suggestions. All the lights are bright so it is not an earth problem........
- Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Indicators working but no hazzards
Only a guess, but could a wire have come of the back of the hazard switch?
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Re: Indicators working but no hazzards
Yeah i`ve got he switch out of the dash gonna check that tonight
- Tramp
- Suzuki, will you marry me?
- Posts: 2829
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: Indicators working but no hazzards
It will be the switch, it has lots of tips inside and only takes one to stop working to mess things up , my hazards stopped working a while back, by repatedly pushing the button it cleaned the tip faces and it started working again, the only thing the electrical system uses different between hazards and indicators is the operating switch
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: Indicators working but no hazzards
I agree with Mr Tramp. The hazard switch should connect both indicator sides together as well as power on.
- Attachments
-
- Indicators.jpg (70.37 KiB) Viewed 4590 times
2005-GV 1600se, "Hell" What do I know!
Re: Indicators working but no hazzards
yep you right it was the switch plenty of WD and repeatedly trying it has done the trick
thanks
thanks