Scottie's Zuke. Blue
Re: Scottie's Zuke
Looks good mate,That week off should really get you on top of things! Cant wait to see it all covered in mud!
Keep up the good work, i'm sure you'll be there!
Keep up the good work, i'm sure you'll be there!
ITS NOT LEAKING OIL...........SHE'S MARKIN HER TERRITORY!!!!!!!!
my ride.........
+2 lift....grizzley boots is all i need!
my ride.........
+2 lift....grizzley boots is all i need!
Re: Scottie's Zuke
Cheers for the comments peeps
the last 2 nights work!
now that the engine and transmission is in i flexed her up to find that i need to do even more trimming to the bulkhead and front arches. i'll start welding it all back up this weekend!
Then tonight i decided to fit the vitara radiator. I used the original mounts out of the vitara but with the O/S one i rotated it 90degrees so that it sits in front of the rad as the steering box is in the way. and then trimmed the N/S one so that it fits between the rad and the chassis.
made up some supports for the top.
trimmed the bonnet so that it closes
the last 2 nights work!
now that the engine and transmission is in i flexed her up to find that i need to do even more trimming to the bulkhead and front arches. i'll start welding it all back up this weekend!
Then tonight i decided to fit the vitara radiator. I used the original mounts out of the vitara but with the O/S one i rotated it 90degrees so that it sits in front of the rad as the steering box is in the way. and then trimmed the N/S one so that it fits between the rad and the chassis.
made up some supports for the top.
trimmed the bonnet so that it closes
Re: Scottie's Zuke
Looks great Scott!
Really coming alone now!
Really coming alone now!
Re: Scottie's Zuke
todays work, you know what? I think there might actually be a good chance of my zuke being on the road for compton basset
I got all the welding finished on the transmission tunnel and one side of the bulkhead finished
my weldings still not the tidiest but my new mig has made it all so much easier
I got all the welding finished on the transmission tunnel and one side of the bulkhead finished
my weldings still not the tidiest but my new mig has made it all so much easier
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Scottie's Zuke
much better than i can do. Me rekons when mines back on the road im coming down for a hands on lesson
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: Scottie's Zuke
Cheers Dan, your welcome over anytime you want, you could come over and give me a hand too
todays work
got the bulkhead all finished and started the front arches.
todays work
got the bulkhead all finished and started the front arches.
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Scottie's Zuke
would love 2 mate but i aint golt any transport apart from my work van which im not allowed 2 use. I will be over when mines sorted
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: Scottie's Zuke
Thats cool no worries! so when is it gonna be sorted i hope its in time for compton basset dan!!!!
I'm motoring on now, still got 2 days left off work and i've got the virtual lift pretty much finished my zuke will be at compton!!!!!!!!!!!!!!
I'm motoring on now, still got 2 days left off work and i've got the virtual lift pretty much finished my zuke will be at compton!!!!!!!!!!!!!!
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Scottie's Zuke
it will be at compton!!!
If it comes to it it will go there on a trailer.
Should be done tho. Im just gunna sort what i need 4 the m.o.t for the moment.
If and when i buy a house im gunna get the body off and sort all the rust and get a 1.6 8v in it
If it comes to it it will go there on a trailer.
Should be done tho. Im just gunna sort what i need 4 the m.o.t for the moment.
If and when i buy a house im gunna get the body off and sort all the rust and get a 1.6 8v in it
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.