i thought i would swap for extended braided hoses whilst im working on the brakes and will have to bleed them anyway.
just shopped about a bit and seen a few kits with internal thread and a few with external threads.
i looked at the truck and i can see the thread but it looks like it could be going into either the side fixed to the truck or the flexy hose. the hex on the end was bigger on the hose so i presume i want internally threaded ones but cant be sure.
i dont wanna take them off now cuz the rear disc kit hasnt turned up yet so dont wanna remove them till i actually start work.
brake hoses
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
brake hoses
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: brake hoses
look at the pic's on llama down at the bottom and try to match them.
Dave, I found was the cheapest and best quality around, he makes them to what ever length, plus hes a reli nice bloke
!
Dan
Dave, I found was the cheapest and best quality around, he makes them to what ever length, plus hes a reli nice bloke
!Dan
http://www.suzukiclubuk.co.uk the new home for your suzuki sj
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: brake hoses
i realised how lazy i was being and went down and had a proper look moments after posting.
i need externally threaded ones.
cheers for the speedy reply tho Dan
i need externally threaded ones.
cheers for the speedy reply tho Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: brake hoses
just had to finish this topic off with
DAVE AT LLAMA 4x4 IS AN ABSOLOUTE LEGEND!!!!!!!!!
WHAT A GUY!!!!
DAVE AT LLAMA 4x4 IS AN ABSOLOUTE LEGEND!!!!!!!!!
WHAT A GUY!!!!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: brake hoses
I'm just about to go and pick my brakelines from dave up from the post office.... ooooooo sexy new brakelines
Re: brake hoses
Dave is a ledgend! But he can talk for wales!
Scott how come your a guest on difflock?
Scott how come your a guest on difflock?
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: brake hoses
just checked on the phone and it says it took exactly 17 mins 20 secs to say hi can i get 3 type 31 hoses in red and give him my address and card details but i loved every minute of it.
he loves Swindon area 2!
he loves Swindon area 2!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: brake hoses
hahahahaha i went to change my avatar and some how hit a button and before i knew it; it said profile deleted
I signed up again and PM'd simon so hopefully it'll get sorted out!
I signed up again and PM'd simon so hopefully it'll get sorted out!
-
w1ldstar
- Got muddy boots
- Posts: 95
- Joined: Fri Oct 02, 2009 7:58 pm
- Location: Upper Wick, Nr Worcester
Re: brake hoses
When i phoned him for brake lines the call lasted 34 minutes 
i only get 10 minutes break at work! Well worth the chat though, he sorted out alot of my issues over the phone
i only get 10 minutes break at work! Well worth the chat though, he sorted out alot of my issues over the phone Suzuki Vitara - 1.5" Suspension lift, Bits4Vits Recovery Bar, Roof rails, Steel front diff.
Drives Shafts broke to date: N/S = 1 - O/S = 0
Drives Shafts broke to date: N/S = 1 - O/S = 0
Re: brake hoses
Daves a allright bloke,,,, i made the mistake of going to his house,, guess how long i was there, hours!!!!!!!!. but hes very hostpitable...
andy
andy