wheels

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
User avatar
windsor
Winching along now
Winching along now
Posts: 618
Joined: Fri May 17, 2013 7:58 am
Location: derbyshire

Re: wheels

Post by windsor » Sun Jul 21, 2013 12:00 am

Thanks looked at 4x4 tyers allready thwre 7s the 8s on tyers direct dont look to bad
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: wheels

Post by turbo-tom » Sun Jul 21, 2013 12:16 am

Both of them are very good companies. They also work with eachother along side. Very good companies 100% recommended. :doublethumbs:
Tom :)

Ford Fiesta ST :D

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: wheels

Post by andyrew » Sun Jul 21, 2013 12:33 am

I have 15 by 8s from tyres direct.

On the car for a month and surface rust started to appear. No corrosion warranty either.
So ill have to blast them and repaint . This was the second set I had from them after the first set
Had two centres welded in bably. Out by an inch or so :| cheap n nasty . But most
Of these rims will be.
Andys Rusty Suzuki Emporium

User avatar
windsor
Winching along now
Winching along now
Posts: 618
Joined: Fri May 17, 2013 7:58 am
Location: derbyshire

Re: wheels

Post by windsor » Sun Jul 21, 2013 12:54 am

I have a set of 15x7 witch ar mangels but dont fancy running 10.5 on em i know u can and i wanna refurb them my mi has a set in 15x8 with mega offset but wont sell em so just lookin round cing whats about b4 i get the money and thank andyrew i fink ill avoid them if there that good
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there

User avatar
windsor
Winching along now
Winching along now
Posts: 618
Joined: Fri May 17, 2013 7:58 am
Location: derbyshire

Re: wheels

Post by windsor » Sun Jul 21, 2013 1:01 am

In fact wile were on the subject am uming and aring about tyers i do alot of road and offroad millage so need summert good for both well more good for crawling tbh keep looking at kl71 unless anyone can recomend anything eless
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: wheels

Post by turbo-tom » Sun Jul 21, 2013 8:57 am

Disvovery cooper stt woeth every penny.
Tom :)

Ford Fiesta ST :D

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: wheels

Post by andyrew » Sun Jul 21, 2013 10:47 am

If I was buy a new set of tyres for road too id go for a non remould. But the insa Sahara style is a pretty good all round tyre. The kumho looks like a great all rounder.

31s on 7j rims looks good to me. These are mine. They were chrome rims. Sand blasted
And pound land gloss black to finish.
Attachments
20130715_221315.jpg
20130715_221315.jpg (2.14 MiB) Viewed 5110 times
Andys Rusty Suzuki Emporium

User avatar
littlesammy
Engaged 4wd low
Engaged 4wd low
Posts: 210
Joined: Thu May 30, 2013 7:35 pm
Location: In a little village outside Milton Keynes

Re: wheels

Post by littlesammy » Sun Jul 21, 2013 10:57 am

I am probably going to break my sammy soon as I keep getting offers that are what I consider to be insulting so I will be looking to sell the five anus wrangler wheels with a tiny bit of surface rust that ill brasso off , have all got virtually new 33x12.5x15 marshal venture MT tyres and when I pay virtually new I mean on has not seen the road and tthe other 4 have done less than 500miles .

looking for somewhere in the region of £500

cheers

liam.
87 Samurai with added spice !

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: wheels

Post by ScottieJ » Mon Jul 22, 2013 9:27 am

10.5" wide tyres will be fine on 7" wheels :thumbup:
Zuki Build

Steady as she goes!

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: wheels

Post by Jordi » Mon Jul 22, 2013 10:46 am

ScottieJ wrote:10.5" wide tyres will be fine on 7" wheels :thumbup:
My old 31/10.50s are on 7js. I thought they were 8s but checked at the weekend and they are defo 7s.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

Post Reply