temp gauge not working
- timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
temp gauge not working
these are two 413 temp sensors and neither seem to work with my 410 temp gauge, using the old 410 wiring loom, and worked fine on the old engine, seems a bit odd neither would work...? any clues?
- Attachments
-
- IMAG0137-533329128.jpg (1.27 MiB) Viewed 4475 times
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
- turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: temp gauge not working
Use a 410 one if your using 410 clocks. Not sure if the threads are the same tho.
Tom
Ford Fiesta ST
Ford Fiesta ST
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: temp gauge not working
The one on the right looks like a oil pressure switch
As Tom says you need the sensor to match the gauge or your get wrong readings.
As Tom says you need the sensor to match the gauge or your get wrong readings.
2005-GV 1600se, "Hell" What do I know!
- timwilks13
- SCUK Website Padawan
- Posts: 1248
- Joined: Sun Feb 03, 2013 5:55 am
- Location: Scarborough, soon to be Poland
Re: temp gauge not working
theyre not the same thread no, if i can find/make an adaptor i will, but temp sensors are just ntc thermistors so i assumed they would just have worked obviously not! the one on the right is the one in my engine, the left was in my spare 413, not sure why theyre different, i think the engine i have is spanish?
1986 SJ410 - Furry dice, new window winder.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
10 kinds of people in this world, those who understand binary and those who dont.
if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.
Re: temp gauge not working
The 410 sender has a 16x1.5mm thread, I made my own adapter to go into the top radiator hose to get the stock temp gauge to work.
Sources of 16x1.5mm nuts include landrover wheel nuts and handbrake cables.
Sources of 16x1.5mm nuts include landrover wheel nuts and handbrake cables.
Re: temp gauge not working
are you sure its the sender? try earthing the wire out and see if the gauge moves?
Re: temp gauge not working
1.3 and 1.6 senders are the wrong resistance for the 410 dials as far as I'm aware.