wont start

Engine not running right? see if we can help you!
Post Reply
mark1
Got muddy boots
Got muddy boots
Posts: 1
Joined: Sat Aug 10, 2013 11:42 am
Location: leigh park havant

wont start

Post by mark1 » Sat Aug 10, 2013 11:49 am

:suzuki: sj410 c reg got spark and engine turns over but it wont start can anyone help thanks

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: wont start

Post by turbo-tom » Sat Aug 10, 2013 12:30 pm

Petrol in it? Blocked lines?
Tom :)

Ford Fiesta ST :D

Boyes
Engaged 4wd low
Engaged 4wd low
Posts: 158
Joined: Tue Jul 03, 2012 6:32 pm
Location: Sheffield/Chesterfield.

Re: wont start

Post by Boyes » Sun Aug 11, 2013 3:56 pm

Squirt a little WD-40 or easy start down the intake, choke on & a little throttle (Not too much that it bogs down) my 410 struggled to start from cold.

Boyes
Engaged 4wd low
Engaged 4wd low
Posts: 158
Joined: Tue Jul 03, 2012 6:32 pm
Location: Sheffield/Chesterfield.

Re: wont start

Post by Boyes » Sun Aug 11, 2013 3:56 pm

Squirt a little WD-40 or easy start down the intake, choke on & a little throttle (Not too much that it bogs down) my 410 struggled to start from cold.

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: wont start

Post by Edweird » Sun Aug 11, 2013 5:15 pm

Is it popping and farting at all or is it just turning over?
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
windsor
Winching along now
Winching along now
Posts: 618
Joined: Fri May 17, 2013 7:58 am
Location: derbyshire

Re: wont start

Post by windsor » Sun Aug 11, 2013 5:37 pm

Pour some petrol into your air intake on your carb like a pop bottle cap full works a treat on carb lumpd av fired up no end of cars and bikes buy doing that
1994 sj 413 sierra
cheker plate door cards
cd players
asin free wheeling hubs
99% rust free
alloys
bukets
some leaks here and there

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: wont start

Post by ScottieJ » Sun Aug 11, 2013 7:16 pm

If its got spark at each plug then there's only two other things that it can really be.

A fuel issue, pull the fuel pipe off the carb and turn it over to see if fuel squirts out.

If you have fuel and it still doesn't start then it is probably an timing issue.
Zuki Build

Steady as she goes!

Pugsley
Engaged 4wd low
Engaged 4wd low
Posts: 111
Joined: Tue Aug 18, 2009 10:41 pm
Location: N. Devon

Re: wont start

Post by Pugsley » Sun Aug 11, 2013 9:33 pm

All good advice but don't discard the fact that you may have a spark with the plug outside of the cylinders but they may be breaking down when under pressure. I've just had a very embarressing lesson with my sit on mower - it conked out for no obvious reason, I checked the plug for sparking, checked the key which holds the flywheel in place incase the timing was incorrect and removed the cylinder head to inspect the valves - all okay.

Took it to an expert who put a new plug in and away it went - all due to the plug braking down under pressure, and me an ex- aero engine technician!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: wont start

Post by ROBBIE » Mon Aug 12, 2013 10:39 am

Have you had the leads off? If yes are they on the right order?
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Post Reply