I am the proud owner of an SJ with a g16a 8valve fitted I need to replace the engine mounts and would like some advice on a replacement for the standard mount as the originals seem to break easily.
Is there a bolt in replacement that is a little more durable than standard.
many thanks gell
engine mounts
-
kibris
- Engaged 4wd low
- Posts: 108
- Joined: Wed Jul 18, 2012 9:06 am
- Location: Alsancak, Girne, Cyprus
Re: engine mounts
I had issues with engine mounts when i put my 6.5 transfer gears in upgraded the tranny case mounts then the weak spot seamed to be the engine mounts - went through 2 lots in not much time!gell wrote:I am the proud owner of an SJ with a g16a 8valve fitted I need to replace the engine mounts and would like some advice on a replacement for the standard mount as the originals seem to break easily.
Is there a bolt in replacement that is a little more durable than standard.
many thanks gell
In the end i fitted these babies - no problem now and I did not get any noticeable increase in vibes - bit pricey but worth the investment.
http://www.zanfi.it/modules.php?name=ca ... ts_id=1370
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: engine mounts
I'm still on stock mounts with my 1.6 16v. I've only broken 1 engine Mount since I was 1.6 8v 6ish years ago
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."