Jay's SJ410 VBJA now sold :(

[Jay18]

got my 31's fitted today...

have flattened the bulkhead seam to gain some space and they just clear by about 1/4 of an inch so going to beat the bulkhead panel back a bit more just to gain a bit more space..

1452375_696869903656841_1992358839_n.jpg (95.78 KiB) Viewed 6484 times

once ive got the space i need i will clean the paint off the seam and get the surface rust off the front of the sill and give it a few coats of underseal...

here are the tyres fitted...

1471277_696967653647066_1943663595_n.jpg (108.73 KiB) Viewed 6484 times

644517_696967590313739_423568307_n.jpg (87.29 KiB) Viewed 6484 times

946053_696967626980402_253229264_n.jpg (100.04 KiB) Viewed 6484 times

[dan_2k_uk]

I reckon they will catch when flexing and turning at the same time.

Looks good though.

[Jay18]

yep i know they will catch offroad lol, but ill keep it on the road for now until i can afford to lift her..

[ScottieJ]

I still say move the axle forwards looks like it needs it, not only for clearance but to centre the wheels in the arch.

Looks good though!

[Jay18]

im really tempted to move the axle cause as you say it should make the wheel centre of the arch aswel as gain me space...

[Jordi]

Gonna be a busy weekend to fit all that in. Should look spot on when its done. 31s on standard height looks good, tyres fill the arches nicely.

[turbo-tom]

Looks smart like that. Shame performance come before looks though.

[Jay18]

Haha yep, hopefully moving the axle will be enough so I wont have to lift it, the bumper should be fairly easy to remake the brackets, I'll do a lift on it at a later date if I need more room to flex...

[Jay18]

most of you have probably seen this on facebook but ill keep this updated anyway...

so today i got the bullbar off ready for its new brackets..

chopped off the bumper mounts and finally chopped the arches back to the wings!!

1453243_697828713560960_453100271_n.jpg (93.25 KiB) Viewed 6414 times

1470310_697946320215866_1791516749_n.jpg (103.12 KiB) Viewed 6414 times

tryed the new headlight surround and it is a tight fit, the slots for adjusting the headlights are different but hey ho its better than a broken one...

1456097_697834810227017_1342277296_n.jpg (95.64 KiB) Viewed 6414 times

both surrounds are now in the shed after having 4 light coats of paint, just hope it doesnt peel with it being so cold, roll on getting electric in the workshop! they arent looking too bad so far though...

601617_698106600199838_718448511_n.jpg (81.8 KiB) Viewed 6414 times

the bullbar will be going back on for now to save a bit of money as im out of work at the moment so using the time ive got now to get the zuk sorted then will be looking for more work...

i plan on getting a heavy duty or winch bumper as i have to agree with most of you about it looking better without the bullbar...

[andyrew]

I liked your anus before

But now I think it looks bad ass dude

Love it