Does anyone know where I can one of these ??
Does anyone know where I can one of these ??
Had to do the clutch on my samurai and notice as I took the clutch plate off this bearing was buggered . It has got a vitara 1.6 eight valve in it the engine code is g16a . Any help would be much appreciate . Cheers
Liam
Liam
- Attachments
-
- image.jpg (2.25 MiB) Viewed 5863 times
-
- image.jpg (2.38 MiB) Viewed 5863 times
Re: Does anyone know where I can one of these ??
From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.
the code is 6200 2rsr
the code is 6200 2rsr
Re: Does anyone know where I can one of these ??
yes, I was also wondering why that bearing has no seal.ScottieJ wrote:From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz
Re: Does anyone know where I can one of these ??
could be why it's no longer any goodRhinoman wrote:yes, I was also wondering why that bearing has no seal.ScottieJ wrote:From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.
Re: Does anyone know where I can one of these ??
Nice one ! Thanks Scott . Other thing I was meant to ask , was can you run without it ?
Re: Does anyone know where I can one of these ??
I would not run it without one, it supports the gearbox input shaft, plus for a £5 component it's not really worth the risk.Tregembio wrote:Nice one ! Thanks Scott . Other thing I was meant to ask , was can you run without it ?
Re: Does anyone know where I can one of these ??
I had the same problem with mine when i changed the gearbox. Just took the remains of the bearing to my local bearing supplyer and they were able to match it up with one off the shelf.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Does anyone know where I can one of these ??
The question is... where did the other ball bearings get to???
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: Does anyone know where I can one of these ??
Nowhere, that's all you get
But the cage has gone walkies..
But the cage has gone walkies..
2005-GV 1600se, "Hell" What do I know!
Re: Does anyone know where I can one of these ??
Yeah didn't find the cage , seal or the other ball bearings :/ never mind . Bearing should be here today and all being well she will be back on the road thanks again .
Liam
Liam