Does anyone know where I can one of these ??

[Tregembio]

Had to do the clutch on my samurai and notice as I took the clutch plate off this bearing was buggered . It has got a vitara 1.6 eight valve in it the engine code is g16a . Any help would be much appreciate . Cheers
Liam

[ScottieJ]

From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.

the code is 6200 2rsr

[Rhinoman]

From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.

yes, I was also wondering why that bearing has no seal.

[ScottieJ]

From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.

yes, I was also wondering why that bearing has no seal.

could be why it's no longer any good

[Tregembio]

Nice one ! Thanks Scott . Other thing I was meant to ask , was can you run without it ?

[ScottieJ]

Nice one ! Thanks Scott . Other thing I was meant to ask , was can you run without it ?

I would not run it without one, it supports the gearbox input shaft, plus for a £5 component it's not really worth the risk.

[ferris]

I had the same problem with mine when i changed the gearbox. Just took the remains of the bearing to my local bearing supplyer and they were able to match it up with one off the shelf.

[twiss]

The question is... where did the other ball bearings get to???

[Darrell]

Nowhere, that's all you get

But the cage has gone walkies..

[Tregembio]

Yeah didn't find the cage , seal or the other ball bearings :/ never mind . Bearing should be here today and all being well she will be back on the road thanks again .
Liam