Does anyone know where I can one of these ??

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Tregembio
Got muddy boots
Got muddy boots
Posts: 8
Joined: Mon Jul 01, 2013 8:16 am
Location: Cornwall

Does anyone know where I can one of these ??

Post by Tregembio » Tue Nov 19, 2013 10:35 am

Had to do the clutch on my samurai and notice as I took the clutch plate off this bearing was buggered . It has got a vitara 1.6 eight valve in it the engine code is g16a . Any help would be much appreciate . Cheers
Liam
Attachments
image.jpg
image.jpg (2.25 MiB) Viewed 5860 times
image.jpg
image.jpg (2.38 MiB) Viewed 5860 times

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Does anyone know where I can one of these ??

Post by ScottieJ » Tue Nov 19, 2013 12:33 pm

From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.

the code is 6200 2rsr

Image
Zuki Build

Steady as she goes!

User avatar
Rhinoman
Suzuki Guru
Suzuki Guru
Posts: 1034
Joined: Tue Mar 26, 2013 5:42 pm
Location: Brinkworth
Contact:

Re: Does anyone know where I can one of these ??

Post by Rhinoman » Tue Nov 19, 2013 1:02 pm

ScottieJ wrote:From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.
yes, I was also wondering why that bearing has no seal.
2006 Jimny JLX+ 1.3 VVT
2000 Vitara 4u2 - Calmini 3+3, 33" MTs, 5:83 R&Ps, winch bumper, remapped ECU.
1986 Suzuki SJ413K - G16 conversion
1984 Suzuki SJ410 - Blitz

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Does anyone know where I can one of these ??

Post by ScottieJ » Tue Nov 19, 2013 1:04 pm

Rhinoman wrote:
ScottieJ wrote:From what I can find it should be a double sealed 10x30x9mm bearing. same as on the sj410.
yes, I was also wondering why that bearing has no seal.
:lol: could be why it's no longer any good :lol:
Zuki Build

Steady as she goes!

Tregembio
Got muddy boots
Got muddy boots
Posts: 8
Joined: Mon Jul 01, 2013 8:16 am
Location: Cornwall

Re: Does anyone know where I can one of these ??

Post by Tregembio » Tue Nov 19, 2013 3:39 pm

Nice one ! Thanks Scott . Other thing I was meant to ask , was can you run without it ?

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Does anyone know where I can one of these ??

Post by ScottieJ » Tue Nov 19, 2013 4:08 pm

Tregembio wrote:Nice one ! Thanks Scott . Other thing I was meant to ask , was can you run without it ?
I would not run it without one, it supports the gearbox input shaft, plus for a £5 component it's not really worth the risk.
Zuki Build

Steady as she goes!

User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Does anyone know where I can one of these ??

Post by ferris » Tue Nov 19, 2013 4:26 pm

I had the same problem with mine when i changed the gearbox. Just took the remains of the bearing to my local bearing supplyer and they were able to match it up with one off the shelf.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Does anyone know where I can one of these ??

Post by twiss » Tue Nov 19, 2013 4:29 pm

The question is... where did the other ball bearings get to???
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Does anyone know where I can one of these ??

Post by Darrell » Tue Nov 19, 2013 7:38 pm

Nowhere, that's all you get ;)

But the cage has gone walkies..
2005-GV 1600se, "Hell" What do I know!

Tregembio
Got muddy boots
Got muddy boots
Posts: 8
Joined: Mon Jul 01, 2013 8:16 am
Location: Cornwall

Re: Does anyone know where I can one of these ??

Post by Tregembio » Wed Nov 20, 2013 6:15 am

Yeah didn't find the cage , seal or the other ball bearings :/ never mind . Bearing should be here today and all being well she will be back on the road :) thanks again .
Liam

Post Reply