ive got the vitara, ive got a pair of reclining bucket seats, i just need to put the two together...
How have you done yours?
Fitting bucket seats into a vit
-
Vitara_Matt
- Got muddy boots
- Posts: 32
- Joined: Sat Nov 23, 2013 4:56 pm
- Location: Thirsk, North Yorkshire
Fitting bucket seats into a vit
If in doubt, Flat out - Colin McRae
Re: Fitting bucket seats into a vit
i took my original seats apart so i just had the subframe.
then i cut the subframe up to reduce the height as much as possible and welded it back together.
then i just welded the mounts for the bucket seats onto the subframe.
it adjusts using the stock vitara runners but does sit a little higher than stock but not by much.
then i cut the subframe up to reduce the height as much as possible and welded it back together.
then i just welded the mounts for the bucket seats onto the subframe.
it adjusts using the stock vitara runners but does sit a little higher than stock but not by much.
If at First You Don’t Succeed Skydiving Is Not for You
-
Vitara_Matt
- Got muddy boots
- Posts: 32
- Joined: Sat Nov 23, 2013 4:56 pm
- Location: Thirsk, North Yorkshire
Re: Fitting bucket seats into a vit
sounds good to me, will give that a bash this weekend, cheers pal
If in doubt, Flat out - Colin McRae