Ignition trouble
Ignition trouble
Hello iv had this sj for a hole now and the old owner had to try and got wire the car to get it going cuz it had the ignition barrel smashed an what he did was bridge the two wires in the plug with a hair pin and touch the black and yellow one to the hair pin is this correct? I'm stuck
- Attachments
-
- image.jpg (1.02 MiB) Viewed 6056 times
-
- image.jpg (1.02 MiB) Viewed 6056 times
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Ignition trouble
Im not 100% on the colours...
but one is +12v, and the other three are for accessories, ignition, and starter.
I would start with the fattest wire and touch them together individually...
but one is +12v, and the other three are for accessories, ignition, and starter.
I would start with the fattest wire and touch them together individually...
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: Ignition trouble
Iv tried touching the fattest nothing happens iv touched the skinniest and it just turns over
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Ignition trouble
OK, best way to find out which is 12v... get a bulb, connect it to a decent earth, and then connect in turn to each of the wires... when the bulb lights that is your main ignition wire
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: Ignition trouble
Yeah I found the main 12 v to turn the dash on then I need to find the wire to power the coil but iv tried all this and nothing haha
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: Ignition trouble
Are those wires supposed to be in the plastic connector ??
Don't look like the regular colours, is this a 410 or 413, I think it may be a spanish built model.
http://forum.suzukiclubuk.co.uk/vi ... it=spanish
Don't look like the regular colours, is this a 410 or 413, I think it may be a spanish built model.
http://forum.suzukiclubuk.co.uk/vi ... it=spanish
2005-GV 1600se, "Hell" What do I know!
Re: Ignition trouble
It's the 410 model can't figure how to start the bloody thing
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: Ignition trouble
Done this..
So white/ with yellow tracer = supply from battery.
Yellow / with green tracer = acc = radio
BYG = supply to fuseboad and therefore igniton. No idea what colour it is as it's not on chart.
Black/ with yellow tracer = starter motor solenoid.
So connect white with yellow tracer to the BYG wire = ignition on
Then flash black/with yellow tracer onto above connection to start
PS could you let us know what colour exactly is that BYG
Cheers Darrell.
So white/ with yellow tracer = supply from battery.
Yellow / with green tracer = acc = radio
BYG = supply to fuseboad and therefore igniton. No idea what colour it is as it's not on chart.
Black/ with yellow tracer = starter motor solenoid.
So connect white with yellow tracer to the BYG wire = ignition on
Then flash black/with yellow tracer onto above connection to start
PS could you let us know what colour exactly is that BYG
Cheers Darrell.
2005-GV 1600se, "Hell" What do I know!
Re: Ignition trouble
Ahh okay what's byg? Sorry I'm new to sj haha
Re: Ignition trouble
Also how would I tell if my coil has shit it's self?