410 Hubs on a Samurai axle?

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
Boyes
Engaged 4wd low
Engaged 4wd low
Posts: 158
Joined: Tue Jul 03, 2012 6:32 pm
Location: Sheffield/Chesterfield.

410 Hubs on a Samurai axle?

Post by Boyes » Thu Jan 16, 2014 1:18 pm

Hi,

Do SJ410 Hubs the whole lot (Not halfshafts, the backing plates & drums themselves) fit on a samurai axle? The reason I ask is that I can get hold of an axle without hubs, but my rear drums are like brand new so would like to get my moneys worth anyway or I'd butcher the spare set I have to convert to discs.

Cheers
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 410 Hubs on a Samurai axle?

Post by ScottieJ » Thu Jan 16, 2014 1:38 pm

Yes only the housing, diffs and shafts are different, everything else is interchangeable.
Zuki Build

Steady as she goes!
Top
Boyes
Engaged 4wd low
Engaged 4wd low
Posts: 158
Joined: Tue Jul 03, 2012 6:32 pm
Location: Sheffield/Chesterfield.

Re: 410 Hubs on a Samurai axle?

Post by Boyes » Thu Jan 16, 2014 1:53 pm

Yes I'm aware the halfshaft lengths are different, and the diff housing on a 410 is smaller than other the 413 and samurai.

Cheers
Top
Post Reply

Return to “SJ series Transmission, Axles, Brakes, wheels and tyres.”