helloo:)
im looking at putting my 1.3 samurai sump on my 1.68v soon. I think I asked about this quite a while ago and someone said that to do this the pickup needs to be modified. can anyone expand on this? I assume this means the pickup from the 1.6 needs modifying, but if I used the pickup from the 1.3 would this eliminate need to modify? if not how does the pickup need to be altered?
Thankyou very much guys.
Joe
sammy sump swap advice
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: sammy sump swap advice
You want to use as much of the 413 pipe as possible so it fits in the sump properly.
The problems are that the top end that goes into the oil pump is bigger on the 1600, and that the bracket mounts onto a different place
I did mine by cutting the end off a 1.6 one and welding it to a 1.3 pipe... then chopping off the 1.6 bracket and welding it to the 1.3 pipe
The problems are that the top end that goes into the oil pump is bigger on the 1600, and that the bracket mounts onto a different place
I did mine by cutting the end off a 1.6 one and welding it to a 1.3 pipe... then chopping off the 1.6 bracket and welding it to the 1.3 pipe
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: sammy sump swap advice
It was quite a while ago though... so I don't have any pics... sorry!
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: sammy sump swap advice
interesting:) thanks for giving me some insight on it mate, know I know what I will be dealing with. I will try and get it all apart tomorrow and maby take some pictures.
Thanks!
Thanks!
Re: sammy sump swap advice
have a look through dan_2k's build thread for pics of modding pickup pipe
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: sammy sump swap advice
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: sammy sump swap advice
Thankyo very much!
Re: sammy sump swap advice
no worries hope that helps/gives you a idea what to aim for
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: sammy sump swap advice
Yep, seems a bit Fidely thought to get it right. Don't suppose anyone has a pre-modified one kicking about that they want to sell?
Re: sammy sump swap advice
ok! next problem...
I have both oil pickups here at home, but the car and engine are elsewhere.
...
nevermind! im just going to go for it. il give an update later weather it has worked or not;)
Thanks again:)
I have both oil pickups here at home, but the car and engine are elsewhere.
...
nevermind! im just going to go for it. il give an update later weather it has worked or not;)
Thanks again:)