Sj410 starter wiring

Got an electrical gremlin? Ask the question here.
User avatar
Sj410red
Engaged 4wd low
Engaged 4wd low
Posts: 121
Joined: Sun Sep 01, 2013 1:54 am
Location: Clacton on sea, Essex
Contact:

Re: Sj410 starter wiring

Post by Sj410red » Sat Jan 18, 2014 11:55 pm

Ok cool, thanks Darrell, I will sort it in the morning.
Cheers Richard
3" calmini lift springs
6" shackles
Rough Country Shocks
Z bar
32mm spacers
Aisan free wheeling hubs
Roll bar
Snorkel
K&N air filter
Poly bushes all round
Diff & Box high breather pipes
Front Diff guard

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Sj410 starter wiring

Post by Darrell » Sun Jan 19, 2014 1:23 pm

Right then been studying the workshop manual and it shows 2 diagrams. One for the early model and one for the later model.
I can't think why the later model would need/want 2 wires basically doing the same job !!
I was unsure what colour wire went to the terminal on the bolt but the black/green seems logical as the black/yellow has a diode inline.
Attachments
410 early wiring.JPG
410 early wiring.JPG (250.98 KiB) Viewed 2904 times
410 later wiring.JPG
410 later wiring.JPG (276.73 KiB) Viewed 2904 times
410 early model.jpg
410 early model.jpg (67.48 KiB) Viewed 2901 times
410 later model.jpg
410 later model.jpg (71.59 KiB) Viewed 2901 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Sj410red
Engaged 4wd low
Engaged 4wd low
Posts: 121
Joined: Sun Sep 01, 2013 1:54 am
Location: Clacton on sea, Essex
Contact:

Re: Sj410 starter wiring

Post by Sj410red » Sun Jan 19, 2014 5:20 pm

Thanks for your help Darrell, I got a connector today and attached that wire as you've shown in diagram, it started fine. Thanks again
3" calmini lift springs
6" shackles
Rough Country Shocks
Z bar
32mm spacers
Aisan free wheeling hubs
Roll bar
Snorkel
K&N air filter
Poly bushes all round
Diff & Box high breather pipes
Front Diff guard

Post Reply