Hey guys, putting the 1600 8v into my 410 today and noticed the carb has a few wires on it, can anyone tell me what these are for?
Cheers
1600 8v carb
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: 1600 8v carb
If its anything like a 1300 there's a fuel stop solenoid and something for the idle up control.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: 1600 8v carb
As Dan says, idle up and fuel shut off.
The 410 doesn't have this idle up so just leave it alone, just means it may tick over at low rpm when you have lots of electricory on.
The colour for the fuel solenoid is the same for both, B/W
The SJ uses the valve body for earth, the vitara has a wire.
Just earth the brown wire anywhere suitable.
The 410 doesn't have this idle up so just leave it alone, just means it may tick over at low rpm when you have lots of electricory on.
The colour for the fuel solenoid is the same for both, B/W
The SJ uses the valve body for earth, the vitara has a wire.
Just earth the brown wire anywhere suitable.
- Attachments
-
- vit sj.jpg (40.51 KiB) Viewed 4029 times
2005-GV 1600se, "Hell" What do I know!
Re: 1600 8v carb
http://forum.suzukiclubuk.co.uk/vi ... =11&t=2100
I just removed all he idle up gubbins when I first fitted my 1.6
I just removed all he idle up gubbins when I first fitted my 1.6
Re: 1600 8v carb
Cheers for the help guys!
ScottieJ your threads for the conversion are ideal!!!
ScottieJ your threads for the conversion are ideal!!!