Restoring a SJ van body.

fitting new seats? welding up arches? Painting your SJ? post your queries here
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Restoring a SJ van body.

Post by donkeychomp » Sun Feb 02, 2014 10:19 pm

Rust is a bit of a no brainer, just make sure you get rid of all of it so you can see good clean metal underneath/around the affected area. Use good quality rust killer on it even if you think it's all gone and then prime over it as soon as possible so it doesn't come back. Filling and sanding down is just a question of patience and practice! Even if you are sure it is as smooth as possible spray black primer over it to highlight any imperfections. You'll get the hang of it!
If it ticks over...leave it

User avatar
HuwJones
Engaged 4wd low
Engaged 4wd low
Posts: 126
Joined: Fri Mar 01, 2013 6:43 pm
Location: Knee deep in shit usually.

Re: Restoring a SJ van body.

Post by HuwJones » Mon Feb 03, 2014 10:12 pm

I had a stroke of good luck tonight. Let me explain.
My primary job is a Machinist/Welder/Fitter on the Ffestiniog Railway, my second job is I'm a Platoon Commander and Sargent Instructor in Clwyd and Gwynedd Army Cadet Force. Tonight was out parade night and one of the cadet's father came in to discuss the progress his son is making.
After discussing what he came there for, he asked me if it was my SJ outside. I said it was and we then started talking about off-roading.
He told me that his day job is 4x4 recovery and repair. he then gave me a tour of his beefed up P-38 Range Rover (Which is one hell of a machine!). I told him that I had bought his van body and he said that he could repair it for me.
If I supply the materials and tools, he'll do it for £20 a day! He explained what he had a arch forming tool and I didn't need to buy repair panels as he could use sheet steel and form it onto shape. More discussions will continue during the week.
Huw
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Restoring a SJ van body.

Post by donkeychomp » Mon Feb 03, 2014 10:17 pm

£20 a DAY?? Holy shit. Go for it...
If it ticks over...leave it

User avatar
HuwJones
Engaged 4wd low
Engaged 4wd low
Posts: 126
Joined: Fri Mar 01, 2013 6:43 pm
Location: Knee deep in shit usually.

Re: Restoring a SJ van body.

Post by HuwJones » Mon Feb 03, 2014 11:02 pm

donkeychomp wrote:£20 a DAY?? Holy shit. Go for it...
That's what I thought!

Huw
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.

User avatar
HuwJones
Engaged 4wd low
Engaged 4wd low
Posts: 126
Joined: Fri Mar 01, 2013 6:43 pm
Location: Knee deep in shit usually.

Re: Restoring a SJ van body.

Post by HuwJones » Fri Feb 07, 2014 9:14 pm

Yesterday I had a good evening taking bits off. Wings now removed, clutch cable, master cylinder, dashboard, wiring loom, accelerator cable, bonnet release cable, steering components and seats. I still need to remove the headlights before scraping the wings.
Next step, is to remove the engine, gearbox, head lining, heater and the remaining brackets that held parts underneath the dashboard.
I've taken the plunge. Ordered a welder today. Will hopefully be here Tuesday. As I've been taking bits off, I've been making a note of the size of the bolts that held them. Then, as I'm getting to the house, brand new shiny stainless ones being ordered. I'm determined to replace all of the bolts that have the Philips screwdriver button head on them, Allen key button head stainless all the way! (Or ordinary hex head ones).
Now to find somewhere that makes body mount rubbers!
Huw
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Restoring a SJ van body.

Post by Jordi » Fri Feb 07, 2014 9:17 pm

1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
HuwJones
Engaged 4wd low
Engaged 4wd low
Posts: 126
Joined: Fri Mar 01, 2013 6:43 pm
Location: Knee deep in shit usually.

Re: Restoring a SJ van body.

Post by HuwJones » Fri Feb 07, 2014 9:23 pm

I did see them. That's why I'm looking for somewhere else. In work, we use rubber washers that are laser cut to absorb the forces in the couplings between locomotives and carriages. I've sent a email to the company that makes them with a CAD file asking how much they would cost.
If they can't make them, I'd better invest in some hole punches and a rubber floor mat!
Huw
Last edited by HuwJones on Fri Feb 07, 2014 9:25 pm, edited 1 time in total.
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Restoring a SJ van body.

Post by Jordi » Fri Feb 07, 2014 9:24 pm

I'm hoping between the 2 Zuks I can salvage a set of mounts as i really don't want to pay that much.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Restoring a SJ van body.

Post by Jordi » Fri Feb 07, 2014 9:26 pm

Or there is this http://www.mountaingoatperformance.eu/s ... j-413.html

More realistic price and poly bush!
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Re: Restoring a SJ van body.

Post by Ladaman » Fri Feb 07, 2014 11:18 pm

HuwJones wrote: Then, as I'm getting to the house, brand new shiny stainless ones being ordered. I'm determined to replace all of the bolts that have the Philips screwdriver button head on them, Allen key button head stainless all the way! (Or ordinary hex head ones).
Be careful if changing load carrying fasteners to SS. SS ones are very weak compared to normal grade 8.8 and better bolts. They will be fine for doors and things like that.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

Post Reply