SJ vs Vitara axles

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: SJ vs Vitara axles

Post by ferris » Wed Feb 12, 2014 8:44 am

If he could make a ff kit for a 413 axle it should end up the same length as a standard samurai axle.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: SJ vs Vitara axles

Post by dan_2k_uk » Wed Feb 12, 2014 8:54 am

Scottie was looking at shortening a Vit axle for added strength.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: SJ vs Vitara axles

Post by ScottieJ » Wed Feb 12, 2014 11:30 am

This is what I'll be doing for the Lwb, running 4.6 vit diffs
http://www.auszookers.com/forum/viewtop ... full+float
Zuki Build

Steady as she goes!
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: SJ vs Vitara axles

Post by ScottieJ » Wed Feb 12, 2014 11:32 am

ferris wrote:If he could make a ff kit for a 413 axle it should end up the same length as a standard samurai axle.
It would end up 1" narrower than a samurai axle unless you made the adapters wider.
Zuki Build

Steady as she goes!
Top
Post Reply

Return to “SJ series Transmission, Axles, Brakes, wheels and tyres.”