Dyna beads tyre balancing

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Dyna beads tyre balancing

Post by Ladaman » Thu Apr 03, 2014 11:21 pm

Has anyone tried or know of these?

It sounds an interesting idea, simple and adjusts to suit tyre out of balance if you loose a "chunk" of tread.

Check out this link if you don't know what I'm on about.

http://www.dynabeads.co.uk/dynabeads_4x4.php

Being a tight git, I was think of using some 6mm BB gun pellets ;)
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dyna beads tyre balancing

Post by dan_2k_uk » Fri Apr 04, 2014 12:07 pm

I have seen videos and reports of people successfully doing this with 6mm BBs. My only concern would be the BBs wearing the tyre from the inside out. Highly unlikely I know but the inside isn't designed to withstand any kind of wear
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Re: Dyna beads tyre balancing

Post by Ladaman » Fri Apr 04, 2014 12:21 pm

But won't the wear bit be the same for any media that is put inside a tyre?
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Dyna beads tyre balancing

Post by dan_2k_uk » Fri Apr 04, 2014 1:49 pm

Yeah. Its probably fine.

I have unbalanced 33s at the moment that don't seem to cause any bother.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

Post Reply