Decided to spruce up the Suzuki's steel wheels....derusted first then 2 coats of Hammerite white smooth paint...did this last about 3 years ago but plenty of the red stuff showing again......
i wonder what others paint their wheels with ?????? if at all
Jim
PAINT YER WHEELS
PAINT YER WHEELS
- Attachments
-
- one down 3 to go
- PDR_0051.JPG (347.91 KiB) Viewed 5547 times
-
- PDR_0051.JPG (347.91 KiB) Viewed 5547 times
Re: PAINT YER WHEELS
Although Hammerite says "straight to rust" I wouldn't even Paint it on bare metal...it's crap 
The only time I've ever had good results with hammerite that had actually lasted is when it's painted over a good etch primer.
The only time I've ever had good results with hammerite that had actually lasted is when it's painted over a good etch primer.
-
Jordi
- Bow down before me
- Posts: 7533
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: PAINT YER WHEELS
I used cheap rattle cans on the alloys, wire brushed them up and primed with white (3 coats) then satin black 3 coats. Baked on over a convector heater. Seemed to take quite well as it kept the alloy wheel nice and warm to the touch.
- IMG_2774.JPG (2.22 MiB) Viewed 5536 times
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: PAINT YER WHEELS
Here, here. I think saying it's crap makes it sound better than it is!ScottieJ wrote:Although Hammerite says "straight to rust" I wouldn't even Paint it on bare metal...it's crap
It used to be awesome before the environmentalists got on the scene.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: PAINT YER WHEELS
I do like hammerite, I do struggle to get the aerosol to take on aluminium bits though, it just sort of runs away from the edges of the metal,
Re: PAINT YER WHEELS
I usually call it Hammershite but thought i'd be polite!Ladaman wrote:Here, here. I think saying it's crap makes it sound better than it is!ScottieJ wrote:Although Hammerite says "straight to rust" I wouldn't even Paint it on bare metal...it's crap
It used to be awesome before the environmentalists got on the scene.
Re: PAINT YER WHEELS
There was a special thinners needed to clean brushes on the earlier hammerite paints but now tin says white spirit.....i always use cellulose thinners anyway.......
yes lies on the can
jim
yes lies on the can
jim
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: PAINT YER WHEELS
Rattle cans...kill all the rust, prime it, top coat then a ton of lacquer. Lasts for yonks.
If it ticks over...leave it
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: PAINT YER WHEELS
Should have used the super coal!Jordi wrote:Baked on over a convector heater
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
Jordi
- Bow down before me
- Posts: 7533
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: PAINT YER WHEELS
Ha ha, haven't had any of that since last Christmas, it destroyed the fire grate. Don't think it would have been too wise as the tyres were fitted at the time.dan_2k_uk wrote:Should have used the super coal!Jordi wrote:Baked on over a convector heater
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank