Kiwizook's resto

kiwizook · Post by **kiwizook** » Sat Jun 28, 2014 6:21 am

so after 3 days, I've managed to finish both footwells, the roof and the back of the cab, so all I have left to do is the front wheelarches, am quite happy with the results too

: Pic_0628_011.jpg (14.22 KiB) Viewed 5312 times

: Pic_0628_010.jpg (15.58 KiB) Viewed 5312 times

: Pic_0628_009.jpg (12 KiB) Viewed 5312 times

and I just temporarily put it back on the chassis, the new bodymounts fit, and it's a good feeling seeing it back to this stage again!

: Pic_0628_012.jpg (22.4 KiB) Viewed 5312 times

and this is the carnage I have to fix for the wheel arch, I might end up making a fibreglass wing, much easier

: Pic_0628_013.jpg (17.5 KiB) Viewed 5312 times

donkeychomp · Post by **donkeychomp** » Sat Jun 28, 2014 10:15 pm

Tidy work matey. Surely you can weld a curved plate onto that last hole?

kiwizook · Post by **kiwizook** » Sun Jun 29, 2014 8:30 pm

if you look closely, you will see the outer wing also has some bodged patches on it, so I have to redo the curvy bit with the dimple in the outer wing first, and then do the actual wheel arch itself, might just make a fibreglass wing for that side, not sure yet though!

kiwizook · Post by **kiwizook** » Mon Jul 14, 2014 8:25 am

had the panel beater around to have a look at the repairs, and he was all happy. reason I did that, is they can require you to get a repair certificate over here, if the inspector's aren't happy at the re-vinning process. if a certified panel beater has a record, we can skip the panel and weld testing, and write out a repair cert straight away. I'm going to try and sneak it through without one though, as they are $500! so I've started sanding down the body ready to paint it when the moisture levels are down again.

also did a perk job for a mate today, and he gave me 3 goodyear wrangler radials, and 1 goodyear wrangler gs/a tyre, all in 225/75r15, on a set of escudo rims! they are the same size as the 600/16 tyres it had on it, and now I have a set of 15 inch rims, which I had wanted for a while, so I'm chuffed with that!

donkeychomp · Post by **donkeychomp** » Mon Jul 14, 2014 10:30 pm

kiwizook · Post by **kiwizook** » Fri Aug 22, 2014 11:09 am

brand new reproduction RH samurai wing turned up, ready to be fitted to save a lot of fabrication and welding. also got the new upholstery fabric ready to be sown up, so I will have some really nice seats again too!

Post by **ScottieJ** » Fri Aug 22, 2014 11:26 am

Nice work! looking forward to seeing this on the road

twiss · Post by **twiss** » Fri Aug 22, 2014 11:42 am

Well I doubt you will ever actually SEE it on the road

Post by **ScottieJ** » Fri Aug 22, 2014 1:34 pm

twiss wrote:Well I doubt you will ever actually SEE it on the road

I will in pictures on here

Post by **dan_2k_uk** » Fri Aug 22, 2014 4:58 pm

Hadn't checked in on this build for a while. Looks like you are getting along nicely.

Keep it up and you will soon be done.

Suzuki Club UK

Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

Re: Kiwizook's resto

test