My engine is seriously struggling to idle...
Will run with a touch of choke ok, but at normal idle it's lumpy and shakes the car before cutting out. Also means I'll sometimes come to a junction and she'll quietly die!
Thought of trying turning the idle adjust up a tad to seeing it would help but can't even find the screw!
Thoughts anyone?
410 rough lumpy idle
Re: 410 rough lumpy idle
1st thing first try a new fuel filter.
2nd check the points gap...0.40 - 0.50mm
3rd give the carb a strip down and clean http://www.suzukiclubuk.co.uk/diy/15-en ... pand-clean
4th check the timing 10* before tdc @850rpm
2nd check the points gap...0.40 - 0.50mm
3rd give the carb a strip down and clean http://www.suzukiclubuk.co.uk/diy/15-en ... pand-clean
4th check the timing 10* before tdc @850rpm
Re: 410 rough lumpy idle
New filter ordered - we'll see how it goes!
Thanks again Scottie
Thanks again Scottie
Re: 410 rough lumpy idle
No better, gap check tomorrow...
It's loud mid exhaust too - there's pressure at the back so don't think there's a hole but I'll get a better look tomorrow.
Need a local SJ owner!
It's loud mid exhaust too - there's pressure at the back so don't think there's a hole but I'll get a better look tomorrow.
Need a local SJ owner!
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: 410 rough lumpy idle
Just outside Leeds, and more clueless than I should be :p
Re: 410 rough lumpy idle
1 and 2 done and it's better - idles now!
Still rough though, lumpy across the Rev range.
Tried the carb... Though fuel filler plate is well and truly stuck down...
Still rough though, lumpy across the Rev range.
Tried the carb... Though fuel filler plate is well and truly stuck down...