Hi guys,
I've got most of the bits to fit a 1.6 engine into my Santana, now it's just a case of putting it together! Hopefully Monday. I still need to get a radiator and a starter motor. I already know where to get a radiator, but my question is, what starter motor do i get? Most referances i see simply say "Skinny starter motor".
Can anyone point me in the right direction? Preferably to the one that they've bought and fitted with no modifications?
Many Thanks
Huw Jones
1.6 8V into SJ
-
HuwJones
- Engaged 4wd low
- Posts: 126
- Joined: Fri Mar 01, 2013 6:43 pm
- Location: Knee deep in shit usually.
1.6 8V into SJ
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: 1.6 8V into SJ
There's a few different ones that fit. Basically if the motor body is slightly smaller in diameter than the flange it will fit.
If it is the same width as the flange it won't.
If it is the same width as the flange it won't.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: 1.6 8V into SJ
Here's a good comparison.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: 1.6 8V into SJ
But a fatty can be made to fit with Mr Angry 
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: 1.6 8V into SJ
Don't do that though!
- Attachments
-
- IMG_83421184802522.jpeg (66.06 KiB) Viewed 5804 times
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: 1.6 8V into SJ
Someone on Facebook......
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
HuwJones
- Engaged 4wd low
- Posts: 126
- Joined: Fri Mar 01, 2013 6:43 pm
- Location: Knee deep in shit usually.
Re: 1.6 8V into SJ
I'd definetly not do that! I'd prefer not to use a grinder at all!
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.