need abit of help

lesward · Post by **lesward** » Sat Aug 23, 2014 2:20 pm

my stalks flop around like crazy in the steering column casings am i missing something they secure too? pic of casings below show some holes that i have nothing for the 3 in triangle formation

Post by **dan_2k_uk** » Sat Aug 23, 2014 5:36 pm

I've no idea but to help someone who may are they round or square stalks?

lesward · Post by **lesward** » Sun Aug 24, 2014 5:19 pm

round stalks bud

Darrell · Post by **Darrell** » Mon Aug 25, 2014 12:07 am

Not sure about the plastic casing but I think 4 screws hold the switch assembly to the steering column.

lesward · Post by **lesward** » Mon Aug 25, 2014 6:06 pm

i must be missing something off column then to screw it too anyone have a pic of what stalks screw too?

Darrell · Post by **Darrell** » Mon Aug 25, 2014 7:01 pm

Now I'm a bit confused because this pic shows screws top and bottom and the column bracket looks correct for this..

lesward · Post by **lesward** » Thu Aug 28, 2014 2:42 pm

none of those brackets on my column

lesward · Post by **lesward** » Thu Aug 28, 2014 2:44 pm

previous owner must of bust them off when bust ignition barrell off damn

djc · Post by **djc** » Sat Aug 30, 2014 7:43 am

Doesn't this depend on your sj year/model etc? Just had to get inside mine due to lighting fault - the covers (you show) are not the mount for switches on mine they just cover all the gubbins, and are fixed together with 3 small cross-head bolts (about M4 maybe, guess) into the 3 holes nearer centre of moulding, and then 2 long self-tappers into holes at front. The first 3 fix lower moulding to metal on column but do not fix the switches. On mine (a '91, spaniard) the switch blocks are seperate (left and right) and each is fixed to the bracket on column using 2 more cross-head bolts (about M4 again, guess) - these go through the plate on column into blind threaded holes in switch block.
Sounds to me you are missing a few screws but yours may be the different version anyway - all switching on one lump like Darrell's pic??

p.s. if yours sounds like mine (i.e. seperate switch blocks left and right) I can do a pic as it's still in bits

lesward · Post by **lesward** » Mon Sep 01, 2014 3:42 pm

djc wrote:Doesn't this depend on your sj year/model etc? Just had to get inside mine due to lighting fault - the covers (you show) are not the mount for switches on mine they just cover all the gubbins, and are fixed together with 3 small cross-head bolts (about M4 maybe, guess) into the 3 holes nearer centre of moulding, and then 2 long self-tappers into holes at front. The first 3 fix lower moulding to metal on column but do not fix the switches. On mine (a '91, spaniard) the switch blocks are seperate (left and right) and each is fixed to the bracket on column using 2 more cross-head bolts (about M4 again, guess) - these go through the plate on column into blind threaded holes in switch block.
Sounds to me you are missing a few screws but yours may be the different version anyway - all switching on one lump like Darrell's pic??

p.s. if yours sounds like mine (i.e. seperate switch blocks left and right) I can do a pic as it's still in bits

my switches are one lump so looks like i need a upper steering column good old p/o bodge

Suzuki Club UK

need abit of help

need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

Re: need abit of help

test