Ideal 1.6 8v engine temp?

Engine not running right? see if we can help you!
Post Reply
User avatar
Cyprus Geoff
Can I have a tow
Can I have a tow
Posts: 251
Joined: Sun Apr 20, 2008 5:54 am
Location: Paphos, Cyprus

Ideal 1.6 8v engine temp?

Post by Cyprus Geoff » Mon Oct 20, 2014 5:28 pm

Anyone got advice on what temperatures my new elec rad fan should cut in?

Bear in mind it gets bloody hot here in Cyprus and when crawling slowly the engine can get really hot. Against this however, I don't want the fans running constantly because I set the "ON" temp too low.

DISCUSS :D

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Ideal 1.6 8v engine temp?

Post by dan_2k_uk » Mon Oct 20, 2014 5:40 pm

The engine is supposed to run at about 86°c I believe.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Ideal 1.6 8v engine temp?

Post by dan_2k_uk » Mon Oct 20, 2014 5:41 pm

Well I think that's when the thermostat opens anyway. Don't know how that corresponds to fan cut in though.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Ideal 1.6 8v engine temp?

Post by twiss » Mon Oct 20, 2014 5:47 pm

The fan should switch on at about 90*, then cut off when it gets back down to 82*

Running temp is between 82 and 90 (ish)
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Ideal 1.6 8v engine temp?

Post by ScottieJ » Mon Oct 20, 2014 6:50 pm

This is what intermitor thermoswitch that I run, the one x-eng use.
image.jpg
image.jpg (85.27 KiB) Viewed 5165 times
The way mine is set up i sometimes think it gets a little hotter than I would like before the first fan kicks in, my engine usually runs in the low 80s.

I think in a hotter country I would run a slightly lower temp to keep the coolant a bit cooler, the thermostat will still regulate the engine temp via coolant flow.
Zuki Build

Steady as she goes!

User avatar
Cyprus Geoff
Can I have a tow
Can I have a tow
Posts: 251
Joined: Sun Apr 20, 2008 5:54 am
Location: Paphos, Cyprus

Re: Ideal 1.6 8v engine temp?

Post by Cyprus Geoff » Mon Oct 20, 2014 9:07 pm

Thanks very much for the replies people, some great info there. I have just been reading a couple of good threads on zukicrawlers - will re-read them tomorrow and will add detail to this thread for others.

Thanks again.
Kali̱nýchta
Geoff

User avatar
Cyprus Geoff
Can I have a tow
Can I have a tow
Posts: 251
Joined: Sun Apr 20, 2008 5:54 am
Location: Paphos, Cyprus

Re: Ideal 1.6 8v engine temp?

Post by Cyprus Geoff » Tue Oct 21, 2014 5:27 am

Well here are two links I found interesting. There is quite a bit of info here but you have to convert Fahrenheit to Centigrade to make sense of it - that is of course if you can be bothered :-)

http://www.zukikrawlers.com/showthread. ... emperature

Interesting way this guy got around his heating issues(make sure you look at page 2):-
http://www.zukikrawlers.com/showthread.php?t=27091

Post Reply