revs racing

Engine not running right? see if we can help you!
Post Reply
oldskoolsboy
Got muddy boots
Got muddy boots
Posts: 7
Joined: Mon Oct 21, 2013 10:37 pm
Location: cheddar somerset

revs racing

Post by oldskoolsboy » Thu Oct 30, 2014 5:59 pm

Hi guys just swapped engines on my sj knackered g13B to an ok g13A everything runs as it should,
except when i switch headlights on revs race upto 3000 rpm. any ideas? cheers mike
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11617
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: revs racing

Post by ScottieJ » Thu Oct 30, 2014 7:25 pm

Sounds like the idle up system needs adjusting.
Zuki Build

Steady as she goes!
Top
User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:
Contact Darrell

Re: revs racing

Post by Darrell » Thu Oct 30, 2014 7:38 pm

Welcome to the club :thumbup:
Needs adjusting.....................or just unplug the bugger.
Attachments
Idle up SJ 413.jpg
Idle up SJ 413.jpg (256.4 KiB) Viewed 7700 times
100_4865.jpg
100_4865.jpg (229.47 KiB) Viewed 7700 times
2005-GV 1600se, "Hell" What do I know!
Top
oldskoolsboy
Got muddy boots
Got muddy boots
Posts: 7
Joined: Mon Oct 21, 2013 10:37 pm
Location: cheddar somerset

Re: revs racing

Post by oldskoolsboy » Thu Oct 30, 2014 8:35 pm

cheers guys "removed the bugger" spot on everthing works. MOT tommrow fingers crissed sorry
dyslexia stops me posting as much as i like, ages rihgting post again thankyou
Top
oldskoolsboy
Got muddy boots
Got muddy boots
Posts: 7
Joined: Mon Oct 21, 2013 10:37 pm
Location: cheddar somerset

Re: revs racing

Post by oldskoolsboy » Fri Oct 31, 2014 7:16 pm

MOT failed offside front axle swivel joint has excessive play, can this be adjusted or will it need replacing?
Top
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:
Contact Ladaman

Re: revs racing

Post by Ladaman » Fri Oct 31, 2014 8:16 pm

I'd think it's either knackered kingpin bearings or it needs some shims removing.

Probably the bearings need changing though.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Top
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3583
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: revs racing

Post by donkeychomp » Fri Oct 31, 2014 10:12 pm

Change it for peace of mind.
If it ticks over...leave it
Top
oldskoolsboy
Got muddy boots
Got muddy boots
Posts: 7
Joined: Mon Oct 21, 2013 10:37 pm
Location: cheddar somerset

Re: revs racing

Post by oldskoolsboy » Sat Nov 01, 2014 1:37 pm

any idea where i can buy a new bearing?
Top
courior
Can I have a tow
Can I have a tow
Posts: 357
Joined: Wed Jul 02, 2014 8:00 pm
Location: Malta

Re: revs racing

Post by courior » Sat Nov 01, 2014 1:39 pm

Hi OldSkool .... If you want me to get you them from my local parts man send me a PM and ill try and sort you out :)
Maruti Gypsy MG410
Electric Fan upgrade
5 speed box
30" Insa Turbo Saharas
1.5" Shackle Lift
LWB Pickup Conversion
Lots of stickers and a Skull gearknob.
Daymaker led lights
Top
Boyes
Engaged 4wd low
Engaged 4wd low
Posts: 158
Joined: Tue Jul 03, 2012 6:32 pm
Location: Sheffield/Chesterfield.

Re: revs racing

Post by Boyes » Sat Nov 01, 2014 3:40 pm

Kingpin bearings can be bought on eBay or most bearing suppliers, if you search on here in the axles sub forum Scott has a sticky on axles, and it lists all the bearings/dimensions etc. Just remember there's two fitted one top & one bottom on EACH side so four kingpin bearings for the front axle.

Just had a look in garage, they are 30302 J2, if you google it you will find them all over.
Top
Post Reply

Return to “Engine”